Abstract:Next generation implantable neural interfaces are targeting devices with mm-scale form factors that are freely floating and completely wireless. Scalability to more recording (or stimulation) channels will be achieved through distributing multiple devices, instead of the current approach that uses a single centralized implant wired to individual electrodes or arrays. In this way, challenges associated with tethers, micromotion, and reliability of wiring is mitigated. This concept is now being applied to both central and peripheral nervous system interfaces. One key requirement, however, is to maximize specific absorption rate (SAR) constrained achievable wireless power transfer efficiency (PTE) of these inductive links with mm-sized receivers. Chip-scale coil structures for microsystem integration that can provide efficient near-field coupling are investigated. We develop near-optimal geometries for three specific coil structures: in-CMOS, above-CMOS (planar coil post-fabricated on a substrate), and around-CMOS (helical wirewound coil around substrate). We develop analytical and simulation models that have been validated in air and biological tissues by fabrications and experimental measurements. Specifically, we prototype structures that are constrained to a 4 mm 4 mm silicon substrate, i.e., the planar in-/above-CMOS coils have outer diameters 4 mm, whereas the around-CMOS coil has an inner diameter of 4 mm. The in-CMOS and above-CMOS coils have metal film thicknesses of 3- m aluminium and 25- m gold, respectively, whereas the around-CMOS coil is fabricated by winding a 25-m gold bonding wire around the substrate. The measured quality factors (Q) of the mm-scale Rx coils are 10.5 @450.3 MHz (in-CMOS), 24.61 @85 MHz (above-CMOS), and 26.23 @283 MHz (around-CMOS). Also, PTE of 2-coil links based on three types of chip-scale coils is measured in air and tissue environment to demonstrate tissue loss for bio-implants. The SAR-constrained maximum PTE measured (together with resonant frequencies, in tissue) are 1.64% @355.8 MHz (in-CMOS), 2.09% @82.9 MHz (above-CMOS), and 3.05% @318.8 MHz (around-CMOS).

Design of High Efficiency Planar Spiral Coil for Implantable Wireless Power Transfer Systems

Chip-Scale Coils for Millimeter-Sized Bio-Implants

High efficiency class-E RF power amplifier for wireless power transfer system

Research on dual‐coupled wireless power transfer system for cardiac pacemaker based on integrated coils

Optimal Design of Planar Spiral Coil for Uniform Magnetic Field to Wirelessly Power Position-Free Targets

A Novel Hybrid Coil Design and Implementation for Wireless Power Transfer Systems

Design optimization of printed spiral coils and impedance matching networks for load-variable wireless power transfer systems

Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission

High efficiency coupling with stacked MEMS coils

A new wireless actuator integrating magnetic resonance coupling with reluctance actuator

Omnidirectional Wireless Power Transfer for Millimetric Magnetoelectric Biomedical Implants

Design and Optimization of Coil for Transcutaneous Energy Transmission System

Optimizing Power Transfer Efficiency in Biomedical Implants: A Comparative Analysis of SS and SP Inductive Link Topologies

Free-Positioning and Omnidirectional Wireless Power Transfer Using Self-Decoupled Planar Transmitter Coils

An Efficiency-Enhanced Wireless Power Transfer System with Segmented Transmitting Coils for Endoscopic Capsule

Analysis of the Double-Layer Printed Spiral Coil for Wireless Power Transfer

The Design and Simulation of Wireless Charging Coil using Maxwell for Implantable Devices

Design of Multi-Coil Wireless Power Transfer System for Gastrointestinal Capsule Robot

Simulative and Experimental Research on Wireless Power Transmission Technique in Implantable Medical Device

Optimization of the Coupling Coefficient of the Inductive Link for Wireless Power Transfer to Biomedical Implants

Optimized Design of Passive Array Coils for HighEfficiency and Anti-Misalignment WPT System