Abstract:Al2O3–Cr2O3 refractories have excellent slag corrosion resistance and can adapt to the oxidation/reduction atmosphere in the smelting reduction ironmaking furnace. Improving the corrosion resistance of chrome corundum refractories is of great significance for extending the life length of industrial kilns and decreasing carbon emissions. In this work, the influences of ZrO2 content on the phase evolution, microstructure, physicochemical properties, mechanical properties and slag corrosion resistance of the ZrO2 reinforced Al2O3–Cr2O3 composite refractories were investigated. The results show that the ZrO2 reinforced Al2O3–Cr2O3 composites are primarily composed of (Al, Cr)2O3 solid solution and m-ZrO2. The compressive strength, flexural strength and hardness of the composite refractories can be improved by adding 2.5 wt% ZrO2. However, adding more ZrO2 will reduce its mechanical properties. This is due to ZrO2 excessive content will augement the porosity of the composite refractories, and the phase transformation of ZrO2 will also lead to the formation of microcracks during the cooling process. It is worth noting that higher ZrO2 content improves the thermal shock resistance of the composites, which is primarily put down to the microcrack toughening mechanism of ZrO2. The corrosion tests show that the thicknesses of the corrosion and infiltration layers of composite refractories are significantly decreased accompanied by ZrO2 content increase. This is because the formation of high melting point CaZr4O9 reduces the CaO content and slag alkalinity, and inhibits the dissolution of Al2O3 into the slag to a certain extent. Therefore, the slag corrosion/penetration resistance of the of the composites are obviously improved with the increase of ZrO2 addition.

Comparative analysis on corrosion behavior of lightweight and dense mullite–corundum refractories: Role of Si‐rich phase

The Effects of Mineral Composition and Sintering Temperature on Synthetic Mullite

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Enhanced corrosion resistance by simultaneous refinement of pore structures and phase composition: A novel lightweight microporous alumina-rich spinel (Mg0.4Al2.4O4)

Corrosion mechanism of cement-bonded Al2O3–MgAl2O4 pre-cast castables in contact with molten steel and slag

Corrosion mechanism of Al2O3–SiC–C refractory by SiO2–MgO-based slag

Improved slag corrosion resistance of MgO–C refractories with calcium magnesium aluminate aggregate and silicon carbide: Corrosion behavior and thermodynamic simulation

Microstructure evolution, mechanical characteristics and erosion behavior of Cr2O3–Al2O3–MgO–ZrO2 refractories in molten reduction slag

Microstructure, phase evolution, mechanical properties and slag corrosion resistance of ZrO2 reinforced Al2O3–Cr2O3 composites

Effect of Addition Amount of Mullite Sols on Property of Corundum Castable

Slag Corrosion Behavior of Novel Lightweight Magnesia Castable in a High-Basicity Slag: Role of Micropores and Nanosized Zirconia

Enhancement, application, and challenges of chromium–corundum high‐temperature refractories

Corrosion of MgO–C Refractory with Ladle Slags

A comparative study on the slag resistance of MgO–C, low‐carbon MgO–C, and MgO–SiC–C refractories

Corrosion in high alumina refractory serviced in a bench-scale entrained flow gasifier

Properties and Structure of Micro Porous Mullite-Corundum Refractory with High Strength

Degradation behaviors of cement-free corundum-spinel castables in Ruhrstahl Heraeus refining ladle: Role of infiltrated steel

Corrosion mechanism of reactive MgO‐bonded Cr2O3‐bearing castables in CaO–Al2O3–Fe2O3–SiO2‐based steel‐making slag

Research on the Wetting and Corrosion Behavior Between Converter Slag with Different Alkalinity and MgO-C Refractories

The critical role of aggregate microstructure in thermal shock resistance and slag resistance of Al2O3–SiC–C castable

Preparation Of Lightweight Mullite-Corundum Materials With High-Strength And Low Thermal-Conductivity