Abstract:Solid solution strengthening is a well‐known strengthening mechanism for the 4xxx (Al‐Si alloys), 5xxx (Al‐Mg alloys), and 6xxx (Al–Mg–Si alloys). The distribution of solute atoms plays an important role in optimisation of the mechanical properties (increasing both the strength and ductility) of the alloys. While the distribution of solute atoms in the solid solution generally is assumed to be homogenous, solute clusters formed from randomly distributed solute atoms challenges this general assumption. Both dilute Al alloys (Al–Mg, Al–Si, and Al–Mg–Si) were solution treated at 450°C for 2 h and then quenched in room‐temperature water. They were analysed by atom probe tomography and these data have been employed in order to assess the 3D distribution of solute atoms in the solid solutions. The effects of the 3D distribution of solute atoms on the solid solution strengthening were also examined by mechanical testing (microhardness, tensile testing). An innovative approach was to abstain from conventional logic of binary vs ternary alloys in data analysis in favour of a less‐concentrated vs more‐concentrated strategy. This approach enables for the first time the integration of first principles Condon‐Morse atomic interaction effects, APT, and mechanical testing, which resulted in a novel empirical singleton‐cluster plot. The plot allows differentiation between singletons, solute clusters, and co‐clusters as well as between the less‐concentrated and more‐concentrated alloys. The plot also allows determination of the maximal yield strengths from cluster strengthening and from singletons in the absence of clustering. Most critically, this new approach in data analysis allows for the first time the determination of the d max based on experimental results. The APT statistical data analysis and the materials properties are underpinned by the newly identified differentiating roles of field, proximity, chemical, and atomic size effects on the distribution and homogeneity of the singletons and solute clusters. The singleton strengthening of the less concentrated dilute binary alloys is dominated by the field effect while cluster strengthening of the more concentrated dilute binary alloy inevitably is dominated by the proximity effect. In contrast, the co‐cluster strengthening of the less and more concentrated dilute ternary alloys involves a transition that is dependent largely on the dominance of the chemical effect over the proximity effect . A singular observation from these data is that the more concentrated dilute binary alloy exhibit simultaneous increases in both strength and ductility. Finally, the data for ductility and number densities of singletons and clusters suggests the dominant role of the proximity effect over that of the field and chemical effects. This article is protected by copyright. All rights reserved.

First‐Principles Design of Alloy Systems, Part I: Effects of Solute Type, Concentration, and Distribution on Alloying and Mechanical Properties – As‐Quenched Dilute Al (Mg, Si) Alloys

Effect of Alloying Elements, Solutionizing Time and Quenching Media on the Microstructure and Tensile Properties of 413-Based Alloys

Effects of Distributions of Al, Zn and Al+Zn Atoms on the Strengthening Potency of Mg Alloys: A First-Principles Calculations

Aluminum Alloys:Solute Atom Clusters and Their Strengthening

Alloying Design Strategy for Biodegradable Zinc Alloys Based on First-Principles Study of Solid Solution Strengthening

Large hardening response mediated by room-temperature dynamic solute clustering behavior in a dilute Mg-Zn-Ca-Sn-Mn alloy

Simultaneous Increase of Tensile Strength and Ductility of Al-Si Solid Solution Alloys: the Effect of Solute Si on Work Hardening and Dislocation Behaviors

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Molecular Dynamics Simulation of Solution Strengthening of Si and Cu Atoms in Aluminum Alloy

Local atomic ordering strategy for high strength Mg alloy design by first-principle calculations

Toward strength-ductility synergy in Al–Mg alloys: augmenting solute Mg concentration and strain-hardening ability via melt spinning and hot extrusion

Simultaneously Enhanced Strength, Ductility and Formability of Al-Mg-Si-Cu-Zn-Fe-Mn Alloy Sheets by Coupling Distribution of Solute, Phases and Grains

Achieving high strength via solutes co-clustering and solvents redistribution in an ultralightweight BCC magnesium alloy

Effect of Alloying Elements on the Short-Range Orders and Atomic Diffusion Behavior of Liquid Al−9Si Cast Alloys

Effect of Al-Zr and Si-Zr Atomic Pairs on Phases, Microstructure and Mechanical Properties of Si-alloyed (Ti28zr40al20nb12)100-Xsix (x=1, 3, 5, 10) High Entropy Alloys

Effects of precipitates and solute atoms on the work hardening and softening behavior of Zn-rich aluminum alloy

Revealing the Local Lattice Strains and Strengthening Mechanisms of Ti Alloys

Concurrent Enhancement of Strength and Ductility for Al-Si Binary Alloy by Refining Si Phase to Nanoscale

First Principles Investigation of the Effects of Chemical Short-Range Ordering Clusters on the Ideal Tensile Strength and Ductility of Aluminum Alloys

Alloying Effects on the Microstructure and Mechanical Properties of Nanocrystalline Cu-based Alloyed Thin Films: Miscible Cu-Ti Vs Immiscible Cu-Mo

A New Synergy to Overcome the Strength-Ductility Trade-off Dilemma in Al–Si–Cu Alloy by Micro-Nano-particle Complex Clusters