Abstract:In the present study, we selected solutes to be added to the CrCoNi medium-entropy alloy (MEA) based on the mismatch of self-diffusion activation energy (SDQ) between the alloying elements and constituent elements of the matrix, and then investigated their grain growth behavior and mechanical properties. Mo and Al were selected as the solutes for investigation primarily because they have higher and lower SDQ, respectively, than those of the matrix elements; a secondary factor was their higher and lower shear modulus. Their concentrations were fixed at 3 at.% each because previous work had shown these compositions to be single-phase solid solutions with the face-centered cubic structure. Three alloys were produced by arc melting, casting, homogenizing, cold rolling and annealing at various temperatures and times to produce samples with different grain sizes. They were (a) the base alloy CrCoNi, (b) the base alloy plus 3 at.% Mo, and (c) the base alloy plus 3 at.% Al. The activation energies for grain growth of the CrCoNi, CrCoNi-3Mo and CrCoNi-3Al MEA5 were found to be similar to 251, similar to 368 and similar to 219 kJ/mol, respectively, consistent with the notion that elements with higher SDQ (in this study Mo) retard grain growth (likely by a solute-drag effect), whereas those with lower values (Al) accelerate grain growth. The roomtemperature tensile properties show that Mo increases the yield strength by similar to 40 % but Al addition has a smaller strengthening effect consistent with their relative shear moduli. The yield strength as a function of grain size for the three single-phase MEA5 follows the classical Hall-Petch relationship with much higher slopes ( >600 MPa mu m(-0.5)) than traditional solid solutions. This work shows that the grain growth kinetics and solid solution strengthening of the CrCoNi MEA can be tuned by selecting solute elements that have appropriate diffusion and physical properties. (C) 2020 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Tailoring Grain Growth and Solid Solution Strengthening of Single-Phase CrCoNi Medium-Entropy Alloys by Solute Selection

Composition Design Study of Strong and Ductile Mo-alloyed CoCrNi Medium-Entropy Alloys

Deciphering the effect of W and Mo co-additions on recrystallization behavior and strengthening mechanism of CrCoNi medium entropy alloy

Design and Optimization of the Composition and Mechanical Properties for Non-Equiatomic CoCrNi Medium-Entropy Alloys

Enhanced strength-ductility synergy in a Ta-doped CoCrNi medium-entropy alloy with a dual heterogeneous structure

Effect of Al Addition on Microstructure and Properties of CoCrNi Medium-Entropy Alloy Prepared by Powder Metallurgy

Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon

Partially Recrystallized Heterostructure Via Mo-doping Endows CoCrNi Medium-Entropy Alloy with Exceptional Strength and Ductility

Additively manufactured high strength and ductility CrCoNi medium entropy alloy with hierarchical microstructure

A quasi-in-situ EBSD study of the thermal stability and grain growth mechanisms of CoCrNi medium entropy alloy with gradient-nanograined structure

Achieving excellent strength-ductility synergy in twinned NiCoCr medium-entropy alloy via Al/Ta co-doping

A Strong and Ductile NiCoCr-based Medium-Entropy Alloy Strengthened by Coherent Nanoparticles with Superb Thermal-Stability

Grain Refinement of CoNiCrMo Non-equiatomic Medium Entropy Alloy

Dynamic Shear Deformation of a CrCoNi Medium-Entropy Alloy with Heterogeneous Grain Structures

Tuning Microstructures and Tensile Properties of the CoNiV Medium Entropy Alloy by Minor Alloying

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Influence of annealing temperatures on the microstructure and deformation behavior of a CrCoNi based medium-entropy alloy

Breaking the trade-off between strength and ductility in nanostructured CrCoNi-based medium-entropy alloys by promoting twinning kinetics

Revealing the deformation mechanisms of symmetric tilt grain boundaries in CoCrNi medium-entropy alloy

Microstructure and Mechanical Properties of Novel CrCoNi–Al2O3P Medium Entropy Alloy-Matrix Composites

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures