Abstract:CoCrNi medium entropy alloy additive part was fabricated by laser directed energy deposition process. Based on an optimized additive manufacturing process parameters, the microstructure, tensile properties and corrosion performance in the XOY and XOZ planes were compared to learn the anisotropic properties of the additive part. The majority of the additive parts consisted of equiaxed grains, a small proportion consisted of elongated needle-like grains. The equiaxed and elongated needle-like grains in the XOY plane were finer compared to that in the XOZ plane. The corrosion electrochemical activity is uniform in the XOY plane, but varies at different heights in the XOZ plane base on scanning vibrating electrode technique results. Electron backscatter diffraction results near the fracture indicated a larger and relatively more homogeneous residual stress peak in the XOY plane. The tensile and yield strengths in the XOZ plane were lower than those in the XOY plane by approximately 98.5 MPa and 19.1 MPa. While the elongation in the XOZ plane was more than twice as high as that in the XOY plane. The reason for the anisotropic tensile behavior was the strong texture in the XOY plane and the relatively random grain orientation in the XOZ plane. Single crystal and polycrystalline molecular dynamics were used to simulate the anisotropic tensile properties in the XOZ and XOY planes. Single crystal simulation results showed that the maximum stress was 19.0 GPa and elongation was 13.0% when the stretching was along the [110] crystal orientation. The minimum stress was 17.1 GPa and elongation is 11.1% elongation when the stretching was along the [11 ] crystal orientation. Anisotropy existed for CrCoNi alloys in terms of tensile properties along different orientations. Polycrystalline simulation in the XOY plane results showed that the main cause of anisotropy between them was the tangling of the 1/6 dislocations and the 1/6 dislocations, which caused obstacles to dislocation motion and thus improved the strength of CoCrNi additive parts. High tensile strength in the XOY plane, not the XOZ plane, was attributed to 1/6 and 1/6 dislocation tangles at the (1 0)/(115) planes.

Microstructure and mechanical properties of CoCrNi-Mo medium entropy alloys: Experiments and first-principle calculations

Composition Design Study of Strong and Ductile Mo-alloyed CoCrNi Medium-Entropy Alloys

Deciphering the effect of W and Mo co-additions on recrystallization behavior and strengthening mechanism of CrCoNi medium entropy alloy

Plastic deformation mechanism of CoCrxNi medium entropy alloys

Mo content-dependent hardness and microstructural evolution of CoCrNiMo x medium entropy alloys

The Effects of Refractory Elements on Mechanical Properties in CoCrNiFe Concentrated Solid Solution Alloys Across Different Temperatures

Microstructures and mechanical properties of FeCoNi(MoW) high-entropy alloys

Effect of Mo Content on Microstructure and Mechanical Properties of CoCrFeNi Series High-entropy Alloys

Mo Content-Dependent Hardness and Microstructural Evolution of CoCrNiMox Medium Entropy Alloys

Microstructure and Mechanical Properties of Novel CrCoNi–Al2O3P Medium Entropy Alloy-Matrix Composites

The Microstructures and Mechanical Properties of CoNiCrx Medium-Entropy Alloys

Effects of Mo Element on Microstructure and Mechanical Properties of CoCrFeMnNi High Entropy Alloys

Microstructure Evolution and Strengthening Mechanism of AlCrFe2NiCuMox High Entropy Alloys

Microstructure and Mechanical Properties of Ultrafine Grained CoCrFeNi and CoCrFeNiAl0.3 High Entropy Alloys Reinforced with Cr2O3/Al2O3 Nanoparticles

Mechanical properties of Al–Co–Cr–Fe–Ni high-entropy alloy: A molecular dynamics simulation

Microstructure evolution and mechanical properties of CoCrFeNiAl0.3 high entropy alloy produced by ball milling in combination with thermomechanical consolidation

Superior Low Temperature Mechanical Properties and Microstructure of (nicocr)95v5 Medium Entropy Alloy

Effect of Al Addition on Microstructure and Properties of CoCrNi Medium-Entropy Alloy Prepared by Powder Metallurgy

Advanced mechanical properties obtained via accurately tailoring stacking fault energy in Co-rich and Ni-depleted CoxCr33Ni67-x medium-entropy alloys

Design and Optimization of the Composition and Mechanical Properties for Non-Equiatomic CoCrNi Medium-Entropy Alloys

Anisotropic microstructure, properties and molecular dynamics simulation of CoCrNi medium entropy alloy fabricated by laser directed energy deposition