Study on thermal deformation constitutive model of NiCoFeAlCrMo high-entropy alloy with FCC / L12 coherent structure
Jiang Xueyu,Che Xin,Zhou Ge,Zhang Yunsheng,Zhang Haoyu,Zhang Siqian,Chen Lijia,Cao Xue
DOI: https://doi.org/10.1016/j.mtcomm.2023.107757
IF: 3.8
2023-12-04
Materials Today Communications
Abstract:Due to its multi-principal component characteristics, high-entropy alloys exhibit excellent comprehensive mechanical properties and become a new generation of engineering structure alternative materials. At present, a single constitutive model is used to describe the change of flow stress in the study of hot deformation behavior of high-entropy alloys, and there are some problems such as inaccurate prediction accuracy or inapplicability of the model in some hot processing intervals. In this paper, three different constitutive models are combined to fully consider the applicability of the model in different temperature ranges, and the change of flow stress behavior is accurately described, which is of great significance for subsequent deformation mechanism research, hot processing process optimization, numerical simulation and so on. Thermal compression experiments on cast Ni 28.5 Co 18.6 Fe 18.2 Al 16.3 Cr 10.5 Mo 4 Ti 2.3 Nb 0.6 W 0.9 C 0.2 high-entropy alloy were carried out using a Gleeble-3800 thermal simulation tester with deformation temperatures in the range from 900 °C to 1150 °C and strain rates from 0.001 s -1 to 1 s -1 . The constitutive relationships between true stress and strain, temperature and strain rate were established, while the heat deformation process of this alloy under different deformation conditions by Arrhennius, Modified Johnson-Cook and Modified Fields-Backofen models were characterized. The results indicate that Arrenius model describe the rheological behavior of the alloy better in a wider temperature range and at a wider strain rate range. Comparatively, the model shows the highest prediction accuracy in the high-temperature region and slightly lower accuracy in the mesothermal and low-temperature regions. The modified J-C and F-B models have better prediction accuracy in the low-temperature and medium-temperature regions, respectively. Due to the different deformation conditions, dislocation configurations such as dislocation tangles, dislocation networks, and subcrystalline junctions can be observed in the plastic deformation region. The dislocation density of this alloy increases with increasing strain rate and decreasing deformation temperature after deformation.
materials science, multidisciplinary