Abstract:Gas-liquid-solid packed bed reactors or trickle-bed reactors (TBRs) have been widely employed in various industrial applications such as hydrocracking, selective hydrogenation process of gas oil, wastewater treatment and so on. Since the multiphase flow in TBRs is complex, uniform liquid distribution can hardly be obtained. The liquid coverage on particles at various locations in the bed affects the overall reactor performance. In this work, computational fluid dynamics (CFD) simulations with a volume of fluid (VOF) model were employed to investigate liquid mal-distribution at the micro-level in a packed bed reactor. In this study, two different parameters (the local liquid coverage (HL) and local liquid holdup (hL)) were employed to describe liquid distribution on individual particles. The liquid distribution at different particle layers was investigated. The results revealed that the distributions for local liquid coverage and local liquid holdup were similar. The wetting efficiency and the liquid residence time decreased with increasing the voidage. In a packed bed with cylindrical particles, the capillary effect cannot be ignored in smaller channels formed between the particles, leading to higher flow resistance. It was also found that the wetting efficiency and liquid film thickness increased with an increase in the liquid velocity. Both wetting efficiency and the time required to reach steady state decreased when increasing the contact angle. The flow on particle surface could change from rivulet to film as the liquid density decreased. The newly unveiled information of local liquid holdup distribution could significantly advance the understanding of gas-liquid flow hysteresis inside packed beds, based on which the reactor performance can be further improved.

Dispersion behavior of liquid–liquid and gas–liquid two‐phase flow in micro‐packed beds

The gas–liquid mass transfer and pressure drop behaviors of the gas–liquid–liquid three‐phase flow in micro‐packed beds

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Liquid–liquid mass transfer and pressure drop behavior in micro‐packed beds with different shaped packings

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Numerical Investigation of Liquid Dispersion by Hydrophobic/hydrophilic Mesh Packing Using Particle Method

Liquid–liquid two-phase flow and mass transfer characteristics in packed microchannels

Hydrodynamics of Gas–liquid Flow in Micropacked Beds: Pressure Drop, Liquid Holdup, and Two‐phase Model

Liquid–liquid micro-dispersion in a double-pore T-shaped microfluidic device

Numerical simulations of liquid spreading in structured packed column based on liquid dispersion

Gas-liquid-liquid Three-Phase Micro-Scaled Dispersion Process in a Double T-junction Microchannel Device

Liquid dispersion in gas-liquid-solid circulating fluidized beds

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Particle-resolved CFD Simulations of Local Bubble Behaviors in a Mini-Packed Bed with Gas–liquid Concurrent Flow

Bubble/Droplet Formation and Mass Transfer During Gas-Liquid-Liquid Segmented Flow with Soluble Gas in A Microchannel

Nature and Characteristics of Gas–liquid Flow Regimes in a Micro‐packed Bed Reactor

Connection Between Liquid Distribution and Gas-Liquid Mass Transfer in Monolithic Bed

Advanced Understanding of Local Wetting Behaviour in Gas-Liquid-solid Packed Beds Using CFD with a Volume of Fluid (VOF) Method

Modeling investigation of mass transfer of gas-liquid-liquid dispersion systems

Liquid droplet dispersion in a rotating packed bed: Experimental and numerical studies

Experimental and numerical simulation of discrete liquid flow in a packed bed