Abstract:Purpose For high crack-susceptibility materials such as Inconel 713LC (IN713LC) nickel alloy, fabricating crack-free components using the laser powder bed fusion (LPBF) technique represents a significant challenge because of the complex interactions between the effects of the main processing parameters, namely, the laser power and scanning speed. Accordingly, this study aims to build up a methodology which combines simulation model and experimental approach to fabricate high-density (>99.9%) IN713LC components using LPBF process. Design/methodology/approach The present study commences by performing three-dimensional (3D) heat transfer finite element simulations to predict the LPBF outcome (e.g. melt pool depth, temperature and mushy zone extent) for 33 representative sample points chosen within the laser power and scanning speed design space. The simulation results are used to train a surrogate model to predict the LPBF result for any combination of the processing conditions within the design space. Then, experimental trials were performed to choose the proper hatching space and also to define the high crack susceptibility criterion. The process map is then filtered in accordance with five quality criteria, namely, avoiding the keyhole phenomenon, improving the adhesion between the melt pool and the substrate, ensuring single-scan-track stability, avoiding excessive melt pool evaporation and suppressing the formation of micro-cracks, to determine the region of the process map which improves the relative density of the IN713LC component and minimizes the micro-cracks. The optimal processing conditions are used to fabricate IN713LC specimens for tensile testing purposes. Findings The optimal processing conditions predicted by simulation model are used to fabricate IN713LC specimens for tensile testing purposes. Experimental results show that the tensile strength and elongation of 3D-printed IN713LC tensile bar is higher than those of tensile bar made by casting. The yield strength of 791 MPa, ultimate strength of 995 MPa, elongation of 12%, and relative density of 99.94% are achieved. Originality/value The present study proposed a systematic methodology to find the processing conditions that are able to minimize the formation of micro-crack and improve the density of the high crack susceptivity metal material in LPBF process.

A novel framework using FEM and machine learning models with experimental verification for Inconel-718 rapid part qualification by laser powder bed fusion

Integrating Phase Field Modeling and Machine Learning to Develop Process-Microstructure Relationships in Laser Powder Bed Fusion of IN718

A Novel Framework of Developing a Predictive Model for Powder Bed Fusion Process

Thermomechanical Process Simulation and Experimental Verification for Laser Additive Manufacturing of Inconel®718.

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

On the Development of Smart Framework for Printability Maps in Additive Manufacturing of AISI 316L Stainless Steel

Development of an efficient multi-scale model to predict residual stresses and distortions in the laser powder bed fusion process for Inconel-718

Concurrent modeling of porosity and microstructure in multilayer three-dimensional simulations of powder-bed fusion additive manufacturing of INCONEL 718

Study on the Effect of Powder-Bed Fusion Process Parameters on the Quality of as-Built IN718 Parts Using Response Surface Methodology

Thermomechanical process modelling and simulation for additive manufacturing of nanoparticle dispersed Inconel 718 alloys

A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy

Effect of parameters on quality of IN718 parts using laser additive manufacturing

Milling investigations and yield strength calculations for nickel alloy Inconel 625 manufactured with laser powder bed fusion process

Residual Strain Predictions for a Powder Bed Fusion Inconel 625 Single Cantilever Part

Linking Process Parameters with Lack-of-Fusion Porosity for Laser Powder Bed Fusion Metal Additive Manufacturing

A Multiscale Model for Efficiently Simulating Laser Powder Bed Fusion Process with Detailed Microstructure and Mechanical Performance Results

Systematic approach for reducing micro-crack formation in Inconel 713LC components fabricated by laser powder bed fusion

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Prediction of Microstructure for Inconel 718 Laser Welding Process Using Multi-scale Model

Process Optimization and Mechanical Property Investigation of Inconel 718 Manufactured by Selective Electron Beam Melting

Modified inherent strain method coupled with shear strain and dynamic mechanical properties for predicting residual deformation of Inconel 738LC part fabricated by laser powder bed fusion