Abstract:Laser powder bed fusion (LPBF), also called selective laser melting, is an additive manufacturing technology with great potential for creating three-dimensional metallic components with intricate designs. The application of dynamic thermal cycles involving melting and cooling makes it difficult to maintain the desired surface quality and shape in the LPBF process. The LPBF process's dynamic stability of the melt pool is essential to ascertain due to its influence on the quality of the manufactured products. Examining the thermal behavior and temperature distribution inside the melt pool is necessary. Subsequent to experimental validation, employing a finite element model (FEM) has the potential to accurately define thermal distributions and the dimensions of the melt pool. A three-dimensional transient model based on a moving Gaussian heat source was employed in this study to examine the influence of process variables (i.e., scan velocity, laser power, laser beam radius, hatch spacing, number of layers, and scan angle for each layer) on the melt pool shape in LPBF of SS316L powder. A finite element model based on three-dimensional parameters was proposed to evaluate the temperature gradient and melt pool characteristics of SS316L when subjected to laser powder bed fusion. The method takes into account the effect of the laser penetration depth on the characteristics of the molten pool, determined by a multiple-layer (15) and multiple-track (6) finite element model with variable process parameters, such as laser power, scanning speed, beam radius and hatch spacing. Experimental data obtained from the literature were used to calibrate the proposed heat source model, and the adjusted finite element model was then validated through further experiments. The modeling results showed concordance with the experimental data. The effects of the interlayer and intertrack were examined. Temperature distributions for each track and layer and the depth, width and length of the melt pool were evaluated, and the observed values for each variable were analyzed. The average melt pool length, width, and depth were determined to have relative errors of 1.88%, 1.49%, and 2.12%, respectively, between the FEM model and experimentally measured dimensions for an optimal range of varied process parameters.

On the Development of Smart Framework for Printability Maps in Additive Manufacturing of AISI 316L Stainless Steel

An automated computational framework to construct printability maps for additively manufactured metal alloys

An Automated Fully-Computational Framework to Construct Printability Maps for Additively Manufactured Metal Alloys

Defects quantification of additively manufactured AISI 316L stainless steel parts via non-destructive analyses: Experiments and semi-FEM-analytical-based modeling

A novel framework using FEM and machine learning models with experimental verification for Inconel-718 rapid part qualification by laser powder bed fusion

A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

A high-fidelity comprehensive framework for the additive manufacturing printability assessment

Benchmarking of Print Properties and Microstructures of 316L Stainless Steel Laser Powder Bed Fusion Prints

A printability assessment framework for fabricating low variability nickel-niobium parts using laser powder bed fusion additive manufacturing

A Novel Framework of Developing a Predictive Model for Powder Bed Fusion Process

A Facile and Sustainable Integrated Fabrication Strategy for Multi-Performance 316l Stainless Steel

In-situ Monitoring and Defect Detection of Selective Laser Melting Process and Impact of Process Parameters on the Quality of Fabricated SS 316L

Numerical and Experimental Characterization of Melt Pool in Laser Powder Bed Fusion of SS316l

Mapping the roles of scan strategy and build orientation in predicting the crystallographic texture and yield strength of 316L stainless steel produced by laser powder bed fusion

Numerical investigation of thermal loading on stainless steel during laser powder bed fusion

Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing

Metal Laser-Based Powder Bed Fusion Process Development Using Optical Tomography

Combined effect of process variables on the plastic behaviour of 316L stainless steel printed by L‐PBF

Developing the AM G-code based thermomechanical finite element platform for the analysis of thermal deformation and stress in metal additive manufacturing process

Linking Process Parameters with Lack-of-Fusion Porosity for Laser Powder Bed Fusion Metal Additive Manufacturing