Abstract:Selective laser melting (SLM) process produces high-performance metal parts using a layer-by-layer technique involving various influential factors. Nevertheless, there is a research gap in predictive models for the performance of SLM-processed 316L stainless steel, specifically concerning the effect of process parameters and their interactions. To address this, a systematic approach based on Taguchi design and analysis of variance (ANOVA) was used to optimize the SLM processing of 316L stainless steel. An experimental plan was set up using an L9 orthogonal array, with laser power, hatch spacing, and scan speed as input variables, each with three levels. Optical microscopy was used to analyze microstructure and porosity, while response variables, including relative density, surface roughness, hardness, and tensile properties, were measured. Regression models and response surface method (RSM) contour plots modeling the relationship between the input factors and the response variables were also presented. The main aim of this study is to provide valuable design tools for predicting and optimizing the performance of 316L SS processed by SLM. Results showed high densification levels (up to 99.97%) and excellent mechanical properties, surpassing conventionally processed 316L SS. The sample produced at P = 170W, h = 0.08 mm, and v = 1000 mm/s exhibited the highest tensile properties with a yield strength of 421 MPa, hardness of 245 HV, and elongation at failure of 42%. For the variation range, ANOVA results showed that hatch spacing was the most significant parameter influencing relative density and mechanical properties. The scan speed and hatch spacing increase negatively impacted all properties due to low densification. Moreover, increased laser power can melt the powder, resulting in less porosity. As a result, surface finish and ductility are improved. Overall, the findings of this paper contribute to the fabrication of stainless steel 316L using SLM with optimized parameters.

A comprehensive investigation on application of machine learning for optimization of process parameters of laser powder bed fusion-processed 316L stainless steel

Machine learning for advancing laser powder bed fusion of stainless steel

Process Parameter Optimization in Metal Laser-Based Powder Bed Fusion Using Image Processing and Statistical Analyses

Characterisation and prediction of mechanical properties in laser powder bed fusion-printed parts: a comparative analysis using machine learning

Unveiling Processing--Property Relationships in Laser Powder Bed Fusion: The Synergy of Machine Learning and High-throughput Experiments

Optimizing additive manufacturing parameters for martensitic stainless steel via machine learning

Investigation into the effect of process parameters on density, surface roughness, and mechanical properties of 316L stainless steel fabricated by selective laser melting

Perspectives of using machine learning in laser powder bed fusion for metal additive manufacturing

Application of artificial intelligence to optimize the process parameters effects on tensile properties of Ti-6Al-4V fabricated by laser powder-bed fusion

Mapping the roles of scan strategy and build orientation in predicting the crystallographic texture and yield strength of 316L stainless steel produced by laser powder bed fusion

Process Optimization of Selective Laser Melting 316L Stainless Steel by a Data-Driven Nonlinear System

A Novel Framework of Developing a Predictive Model for Powder Bed Fusion Process

Process modeling in laser powder bed fusion towards defect detection and quality control via machine learning: The state-of-the-art and research challenges

A review of machine learning techniques for process and performance optimization in laser beam powder bed fusion additive manufacturing

Intelligent laser-based metal additive manufacturing: A review on machine learning for process optimization and property prediction

Predicting melt track geometry and part density in laser powder bed fusion of metals using machine learning

Laser Powder Bed Fusion Parameter Selection via Machine-Learning-Augmented Process Modeling

Assessing the Process-Property Relationship in Laser Powder Bed Fusion of AlSi10Mg Using Kalman Filter-Based Machine Learning Algorithms

Benchmarking of Print Properties and Microstructures of 316L Stainless Steel Laser Powder Bed Fusion Prints

A review of the multi-dimensional application of machine learning to improve the integrated intelligence of laser powder bed fusion