Abstract:Variation in the local thermal history during the Laser Powder Bed Fusion (LPBF) process in Additive Manufacturing (AM) can cause micropore defects, which add to the uncertainty of the mechanical properties (e.g., fatigue life, tensile strength) of the built materials. In-situ sensing has been proposed for monitoring the AM process to minimize defects, but successful minimization requires establishing a quantitative relationship between the sensing data and the porosity, which is particularly challenging with a large number of variables (e.g., laser speed, power, scan path, powder property). Physics-based modeling can simulate such an in-situ sensing-porosity relationship, but it is computationally costly. In this work, we develop Machine Learning (ML) models that can use in-situ thermographic data to predict the micropore of LPBF stainless steel materials. This work considers two identified key features from the thermal histories: the time above the apparent melting threshold (τ) and the maximum radiance (Tmax). These features are computed, stored for each voxel in the built material, and then used as inputs. The binary state of each voxel, either defective or normal, is the output. Different ML models are trained and tested for the binary classification task. In addition to using the thermal features of each voxel to predict its own state, the thermal features of neighboring voxels are also included as inputs. This is shown to improve the prediction accuracy, which is consistent with thermal transport physics around each voxel contributing to its final state. Among the models trained, the F1 scores on test sets reach above 0.96 for Random Forests. Feature importance analysis based on the ML models shows that Tmax is more important to the voxel state than τ. The analysis also finds that the thermal history of the voxels above the present voxel is more influential than those beneath it. Our study significantly extends the capability of using in-situ thermographic data to predict porosity in LPBF materials. Since ML models are fast, they may play integral roles in the optimization and control of such AM technologies.

Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process

Inference of highly time-resolved melt pool visual characteristics and spatially-dependent lack-of-fusion defects in laser powder bed fusion using acoustic and thermal emission data

Multi Phenomena Melt Pool Sensor Data Fusion for Enhanced Process Monitoring of Laser Powder Bed Fusion Additive Manufacturing

Traditional machine learning and deep learning for predicting melt-pool cross-sectional morphology of laser powder bed fusion additive manufacturing with thermographic monitoring

Predicting defects in laser powder bed fusion using in-situ thermal imaging data and machine learning

Predicting Laser Powder Bed Fusion Defects Through In-Process Monitoring Data and Machine Learning

Machine learning–aided real-time detection of keyhole pore generation in laser powder bed fusion

Semi-supervised machine learning of optical in-situ monitoring data for anomaly detection in laser powder bed fusion

Continuous online flaws detection with photodiode signal and melt pool temperature based on deep learning in laser powder bed fusion

In-Situ Infrared Camera Monitoring for Defect and Anomaly Detection in Laser Powder Bed Fusion: Calibration, Data Mapping, and Feature Extraction

Toward in-situ flaw detection in laser powder bed fusion additive manufacturing through layerwise imagery and machine learning

Machine learning based prediction of melt pool morphology in a laser-based powder bed fusion additive manufacturing process

Machine‐Learning‐Based Monitoring of Laser Powder Bed Fusion

Methodology to Determine Melt Pool Anomalies in Powder Bed Fusion of Metals Using a Laser Beam by Means of Process Monitoring and Sensor Data Fusion

In-situ visual monitoring for multi-scale defects detection in laser powder bed fusion

Multiple Sensor Detection of Process Phenomena in Laser Powder Bed Fusion

Direct mechanistic connection between acoustic signals and melt pool morphology during laser powder bed fusion

Deep semi-supervised learning of dynamics for anomaly detection in laser powder bed fusion

Data-fusion for in-situ monitoring and molten state identification during LPBF of NiCoCr medium-entropy alloy

A new data-driven framework for prediction of molten pool evolution and lack of fusion defects in multi-track multi-layer laser powder bed fusion processes