Effect of Hydroxypropyl methyl cellulose (HPMC) on rheology and printability of the first printed layer of cement activated slag-based 3D printing concrete
Yunchao Yin,Jian Huang,Tiezhu Wang,Rong Yang,Hailong Hu,Mesfin Manuka,Fengyang Zhou,Junjie Min,Huilong Wan,Donghui Yuan,Baoguo Ma
DOI: https://doi.org/10.1016/j.conbuildmat.2023.133347
IF: 7.4
2023-09-20
Construction and Building Materials
Abstract:Nowadays, Ground Granulated Blast Furnace Slag (GGBFS) is generally used to replace cement for reducing carbon emissions, but due to its low hydration activity and unstable working performance in the early stage, it is difficult to apply in 3D printed concrete (3DPC) as the main binder. In this study, a combination of ordinary Portland cement and calcium sulfoaluminate cement was used to activate GGBFS. In the presence of 0.2 wt% polycarboxylate superplasticizer (PCE), in order to achieve high-precision printing, hydroxypropyl methyl cellulose (HPMC) was used. The rheological properties of mortar were evaluated by the slugs-test and a rotational rheometer. The results show that the yield stress and thixotropy of slag cement-based 3D printing concrete are significantly increased, with addition of HPMC. The slugs-test shows its advantages in measuring rheological properties, such as superior repeatability of rheological data and a better association with 3D printing performance. Pumpability, extrudability, and buildability of the first printed layer of slag cement-based 3DPC were evaluated using pumping pressure, horizontal printing, and vertical printing. The results show that, with a 0.15 wt% HPMC, the 3D printing properties of the first layer are greatly improved, a stable and high-precision slag cement-based 3DPC can be developed, and the relationship between rheological properties and 3D printing performance can be established.
construction & building technology,materials science, multidisciplinary,engineering, civil