Abstract:A new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN based on the idea of substituting C with N, proper Mo addition, and proper Si and V subtraction was designed, exhibiting higher microstructure and hardness stability than the frequently-used H13 steel. The results showed that the softening mechanism consisted of the coarsening and decomposition of laths, the formation and coarsening of precipitates, the annihilation and rearrangement of dislocations and the formation of sub-grains. The superior thermal stability of 3Cr5Mo2SiVN steel could be attributed to the low precipitate and dislocation recovery. First, the higher activation energy inhibited the diffusion of alloying elements, thus delaying the formation and coarsening of precipitates. Second, the undissolved M(C, N) exhibited a higher solid solution temperature than the undissolved MC, and M 3 C had a stronger heat absorption ability. In addition, the nano‐carbonitride M(C, N) exhibited lower lattice disregistry and interface energy than the nano-carbide MC. Hence, the undissolved M(C, N), M 3 C and nano‐carbonitride M(C, N) showed a higher precipitate stability. Third, in terms of dislocation evolution, the higher stability of lattice constant and solid solution of interstitial atoms as well as the smaller carbide size and lower precipitation content significantly inhibited the dislocation recovery. The preservation of prior austenite grain boundaries and lath boundaries effectively hindered the dislocation migration. After isothermal tempering at 580, 600 and 620 °C for 96 h, the hardness decreased to 41.1, 35.4 and 31.7 HRC with softening rate 4.6, 8.5 and 10.0 for 3Cr5Mo2SiVN steel, and 35.2, 29.3 and 28.1 HRC with softening rate 7.2, 11.2 and 11.5 for H13 steel. The difference in hardness and softening rate at 600 °C was the most prominent, attaining respective values of 6.1 HRC and 2.7, respectively.

Development of a Ni–Cr–Mo–V Alloyed Ductile Iron with High Hardness

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Microstructure of a novel Ni-Cr-W-Mo-V containing ductile iron and decomposition behavior of its eutectic carbides at elevated temperature

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

Effect of Multi-Element Microalloying on the Structure and Properties of High Chromium Cast Iron

Improvement in microstructure and wear-resistance of high chromium cast iron/medium carbon steel bimetal with high vanadium

Microstructure and abrasive wear properties of high-vanadium-chromium wear resistant alloy

Investigation on the Microstructural Evolution and Precipitation Hardening Mechanism of 1cr15ni36w3ti Superalloy with Varied C Contents

Fabrication of a NiAl–Cr(Mo) Eutectic Alloy with Network Microstructure for High-Temperature Strengthening

Microstructure and Mechanical Properties of New AlCo<sub>x</sub>CrFeMo<sub>0.5</sub>Ni High-Entropy Alloys

Overcoming high-temperature strength-ductility trade-off by combination deformation twinning of C11b and D022 superlattices in a Ni-Cr-W/Mo-based superalloy

Interstitial Strengthening of a Cast and Wrought Ni-Based Heavy Density Matrix Alloy by Carbon Addition

Interface characteristics and mechanical properties of wire-arc depositing Inconel 625 superalloy on ductile cast iron

Thermal stability and softening mechanism of a new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN

Preparation and Properties of Ultra-High Hardness Co-Cr-Mo-Nb-B High-Temperature Amorphous Alloy Coating

The effect of chromium additions on the mechanical properties of Ni-25Al-27.5Fe-based intermetallic compounds

Improved Mechanical Properties by Nanosize Tungsten-Molybdenum Carbides in Tungsten Containing Hot Work Die Steels

High Boron Iron-Based Alloy and Its Modification

Investigation of microstructure evolution and mechanical properties of near-eutectic Fe2-CoNiCr C high entropy cast iron

Intrinsic surface hardening and precipitation kinetics of Al 0.3 CrFe 1.5 MnNi 0.5 multi-component alloy

Achieving Excellent Strength-Ductility Balance in Single-Phase CoCrNiV Multi-Principal Element Alloy