Abstract:Yttria-stabilized zirconia (YSZ) has been extensively used as a thermal barrier coating (TBC) for high-temperature alloys. In this research, the microstructural attributes and thermal expansion behavior of an additively manufactured functionally graded composite (YSZ/IN718 FGC) were investigated. First, a powder mixture of IN718 and YSZ (ranging from 1 wt% to 4 wt%) was achieved via low-energy ball-milling at 100 rpm. Differential scanning calorimetry (DSC) analysis depicted the melting behaviour of the powder mixtures of different YSZ content. The endothermic peaks in the DSC curve, at ∼1360 °C, suggested that the energy needed to melt the powder mixture increases with increasing YSZ content. These varying powder compositions were used to fabricate FGC samples using L-PBF. The study investigated the effects of laser power variation along the YSZ gradient, successfully mitigating the fusion defects that had been initially observed in FGC samples. Microscopic analyses, comprising scanning electron microscopy (SEM) and transmission electron microscopy (TEM), depicted the elemental segregation of Nb and Mo at the solidification subgrain boundaries (SSBs). Furthermore, the electron backscattered diffraction (EBSD) results demonstrated the refinement of grains and a reduction in textural intensity, particularly along the YSZ gradient. Energy dispersive spectroscopy (EDS) and electron probe micro analysis (EPMA) were used to validate the uniform dispersion of YSZ particles throughout the composite matrix, with the EPMA line scan affirming a predominantly linear YSZ content variation. Lastly, the coefficients of thermal expansion (CTEs) were evaluated, both parallel and perpendicular to the build direction. A decrease of approximately ∼6 % in CTE was noted along the building or gradation direction. Notably, perpendicular to the building direction, the CTE values for specimens containing 4 wt% and 2 wt% YSZ witnessed significant reductions of ∼32 % and ∼12 %, respectively. This research significantly contributes to the understanding of the microstructural intricacies and thermal behavior of YSZ/IN718 FGC produced by L-PBF process.

Effect of graded microstructure on the modulus, hardness, and strength of hot-pressed ZrB2-B4C FGM

Composition design and mechanical properties of B 4 C/Al-Zn-Mg-Cu functionally graded materials prepared by laser additive manufacturing

Integrated preparation and enhanced performance of high-melting-point ZrC–Mo multilayer graded materials

Functionally Graded Material Production and Characterization using the Vertical Separator Molding Technique and the Powder Metallurgy Method

Synthesis of Functionally Graded AA7075-B4C Composite with Multi-Level Gradient Structure

Fabrication and Ballistic Performance Evaluation of B4C/AA7075 Functionally Graded Materials for Armor Applications

Ballistic performance of functionally graded B 4 C/Al composites without abrupt interfaces: Experiments and simulations

Processing and characterization of 2D woven ZrB2 based ultra high temperature ceramic matrix composites

Fabrication and microstructure of W/Cu functionally graded material

Exploration into the microstructural, mechanical, and biological characteristics of the functionally graded 3Y-TZP/Ti6Al4V system as a potential material for dental implants

A strong, machinable, and multifunctional Ti3SiC2-(Ti3SiC2-Cf) composite: Gradient architecture and mechanical properties

Investigation of microstructure and thermal expansion behaviour of a functionally graded YSZ/IN718 composite produced by laser-powder bed fusion

A universal strategy towards the fabrication of ultra-high temperature ceramic matrix composites with outstanding mechanical properties and ablation resistance

Microstructural Evolution & Mechanical Properties of ZrO2/GNP and B4C/GNP reinforced AA6061 Friction Stir Processed Surface Composites - A Comparative study

Resistance of ceramic / metal Functionally Graded Materials in the flame of a combustion chamber under harsh thermal and environmental conditions

Characterization of Interfacial Transition Zone of Functionally Graded Materials with Graded Composition from a Single Material in Electron Beam Powder Bed Fusion

Mechanical Properties of Short Carbon Fiber Reinforced ZrB2–SiC Ceramic Matrix Composites

Effects of Short Carbon Fiber on Mechanical Properties of ZrB2-SiC Ultra-high Temperature Ceramics

Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites

Enhanced Toughness Of Zirconia Ceramics With Graphene Platelets Consolidated By Spark Plasma Sintering

Processing and oxidation resistance at 1650 °C of ZrB 2 -based UHTCMCs with short fibre gradients