Abstract:Additive manufacturing of metals by 3D printing of polymeric filaments containing high loading of metal powder, subsequent debinding, and sintering offers a potent alternative to the widespread beam-based processes. The polymeric binder is the decisive component for a successful fabrication process. This study presents the development of a multi-component binder system for filament-based 3D printing of 316 L stainless steel in various optimization steps. The binder contains a polyethylene (PE) backbone, which ensures the structural integrity during solvent debinding. A soluble binder component consisting of a thermoplastic elastomer (TPE) and a second PE is used, to reduce the polymer content via solvent extraction prior to thermal debinding. The TPE grants flexibility to the filaments, while the PE allows reduction of the viscosity and increase in stiffness and strength. This enables precise tuning of the rheological and mechanical properties of the filaments. The capabilities of the binder system developed, are demonstrated by the fabrication of 3D plate-lattices. The structures are printed, subjected to a two-step solvent – thermal debinding procedure, and finally sintered. In the compression tests the structures are able to undergo large plastic deformations without fracture, highlighting their potential for energy absorption applications. The main contribution of this work is the development and disclosure of a binder system with two types of soluble polymers. This allows the precise control of the mechanical and rheological properties, as well as the backbone fraction of the binder. Based on the characterization performed, the binder system can be easily modified to adapt for other solid loading materials and fractions, as parameters like stiffness, viscosity, or backbone content can be adjusted precisely.

The effect of cellulose-derived binder on properties and performance of PM steels

Development of Tungsten-Based Materials by Different Sintering Techniques

Effect of the debinding method on the properties of injection molding ceramics

Thermal Debinding for Binder Burnout in Metal and Ceramic Processing

Analyzing the Debinding Step of Ti64 Parts Fabricated by 3D Printing Extrusion

A thermal-initiated monomer binder enhancing green strength with low binder saturation for binder jetting additive manufacturing of cemented carbide

Effect of Composite Binder on the Property of Lightweight Bubble Alumina Ceramics

Effects of PVP Incorporation on the Properties of Injection-Molded High-Performance Ceramics with PEG-based Binders

Effect of three different binders and pellet feed on granulation behaviour of sintering mixtures

Effect of sintering temperature on binder jetting additively manufactured stainless steel 316L: densification, microstructure evolution and mechanical properties

Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

The effect of binder phase content on WC-AlCoCrFeNiTi0.2 high entropy cemented carbides microstructure and mechanical properties

Research on pre-debinding process of binders for ultrafine cemented carbide bar extrusion molding

Effects of the Binder Compositions on the Homogeneity of Ceramic Injection Molded Compacts

Effects of debinding condition on microstructure and densification of alumina ceramics shaped with photopolymerization-based additive manufacturing technology

Effect of binder on the structure and mechanical properties of lightweight bubble alumina ceramic

Effects of Solvent Debinding on the Microstructure and Properties of 3D-Printed Alumina Ceramics

Effect of feedstock bimodal powder design and cold isostatic pressing on the mechanical behavior of binder jetting additive manufactured Inconel 718 superalloy

X-ray observation study of the influence of binder deposition on sintering process of aluminum binder jetting

Fused filament fabrication of stainless steel structures - from binder development to sintered properties

Effects of POE-g-MAH on properties of PP-based binder in metal injection molding