Abstract:The good interaction between the ceramic powder and the binder system is vital for ceramic injection molding and prevents the phase separation during processing. Due to the non-polar structure of polyolefins such as high-density polyethylene (HDPE) and the polar surface of ceramics such as zirconia, there is not appropriate adhesion between them. In this study, the effect of adding high-density polyethylene grafted with acrylic acid (AAHDPE), with high polarity and strong adhesion to the powder, on the rheological, thermal and chemical properties of polymer composites highly filled with zirconia and feedstocks was evaluated. To gain a deeper understanding of the effect of each component, formulations containing different amounts of HDPE and or AAHDPE, zirconia and paraffin wax (PW) were prepared. Attenuated total reflection spectroscopy (ATR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and rotational and capillary rheology were used for the characterization of the different formulations. The ATR analysis revealed the formation of hydrogen bonds between the hydroxyl groups on the zirconia surface and AAHDPE. The improved powder-binder adhesion in the formulations with more AAHDPE resulted in a better powder dispersion and homogeneous mixtures, as observed by SEM. DSC results revealed that the addition of AAHDPE, PW and zirconia effect the melting and crystallization temperature and crystallinity of the binder, the polymer-filled system and feedstocks. The better powder--binder adhesion and powder dispersion effectively decreased the viscosity of the highly filled polymer composites and feedstocks with AAHDPE; this showed the potential of grafted polymers as binders for ceramic injection molding.

Effect of Increased Powder-Binder Adhesion by Backbone Grafting on the Properties of Feedstocks for Ceramic Injection Molding

Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

Effects of Different Backbone Binders on the Characteristics of Zirconia Parts Using Wax-Based Binder System Via Ceramic Injection Molding

Synergy of low-and high-density polyethylene in a binder system for powder injection molding of SiC ceramics

A Strategy to Obtain a High-Density and High-Strength Zirconia Ceramic Via Ceramic Injection Molding by the Modification of Oleic Acid

The Effect of Organic Vehicle on the Injection Molding of Ultra-Fine Zirconia Powders

Effects of PVP Incorporation on the Properties of Injection-Molded High-Performance Ceramics with PEG-based Binders

Powder Modification Mechanism, Effects of Binder Compositions on the Thermal Behavior, and the Mechanical Properties of the Ceramic Injection Molded System

Effect of Molecular Weight and Chemical Structure of Plasticizer on Suspension Property, Binder Removal, and Sintered Performance for Zirconia Toughened Alumina Ceramics Fabricated by Vat Photopolymerization

Study on Thermoplastic Binder and Mixing Technology for Alumina Ceramic Injection Molding

Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

Effects of the Binder Compositions on the Homogeneity of Ceramic Injection Molded Compacts

Low Dielectric Loss and Infrared Emissivity Coating with Enhanced Mechanical Property by Grafting Modification of EPDM

Effects of POE-g-MAH on properties of PP-based binder in metal injection molding

Novel Fabrication of More Homogeneous Water-Soluble Binder System Feedstock by Surface Modification of Oleic Acid

Surface Modification of the Zirconia Powders for Injection Molding

Study of Hyperbranched Polymer on POM-based Binder in Metal Injection Molding

Research On Sipm-Peg As Water-Soluble Binders Applied In Ceramic Injection Molding

Effects of Binder in Low Press Injection on Green Performance

Injection Molding of Zirconia Ceramics Using Water-Soluble Binder

Study of Polytetrahydrofuran on Polyoxymethylene-Based Binder in Metal Injection Molding