Abstract:The specific energy of the existing lithium ion battery cells is limited because intercalation electrodes made of activated carbon (AC) materials have limited lithium ion storage capacities. Carbon nanotubes, graphene, and carbon nanofibers are the most sought alternatives to replace AC materials but their synthesis cost makes them highly prohibitive. Silicon has recently emerged as a strong candidate to replace existing graphite anodes due to its inherently large specific capacity and low working potential. However, pure silicon electrodes have shown poor mechanical integrity due to the dramatic expansion of the material during battery operation. This results in high irreversible capacity and short cycle life. We report on the synthesis and use of carbon and hybrid carbon-silicon nanostructures made by a simplified thermo-mechanical milling process to produce low-cost high-energy lithium ion battery anodes. Our work is based on an abundant, cost-effective, and easy-to-launch source of carbon soot having amorphous nature in combination with scrap silicon with crystalline nature. The carbon soot is transformed in situ into graphene and graphitic carbon during mechanical milling leading to superior elastic properties. Micro-Raman mapping shows a well-dispersed microstructure for both carbon and silicon. The fabricated composites are used for battery anodes, and the results are compared with commercial anodes from MTI Corporation. The anodes are integrated in batteries and tested; the results are compared to those seen in commercial batteries. For quick laboratory assessment, all electrochemical cells were fabricated under available environment conditions and they were tested at room temperature. Initial electrochemical analysis results on specific capacity, efficiency, and cyclability in comparison to currently available AC counterpart are promising to advance cost-effective commercial lithium ion battery technology. The electrochemical performance observed for carbon soot material is very interesting given the fact that its production cost is away cheaper than activated carbon. The cost of activated carbon is about $15/kg whereas the cost to manufacture carbon soot as a by-product from large-scale milling of abundant graphite is about $1/kg. Additionally, here, we propose a method that is environmentally friendly with strong potential for industrialization.

Structural Evolution of Graphitic Carbon Derived from Ionic Liquids-Dissolved Cellulose and Its Application as Lithium-Ion Battery Anodes

Low Temperature Carbonization of Cellulose Nanocrystals for High Performance Carbon Anode of Sodium-Ion Batteries

Self‐standing hard carbon anode derived from hyper‐linked nanocellulose with high cycling stability for lithium‐ion batteries

Iron-Catalyzed Graphitic Carbon Materials from Biomass Resources as Anodes for Lithium-Ion Batteries

Wheat Bran Derived Carbon Toward Cost-Efficient and High Performance Lithium Storage

Toward Li-ion Graphite Anodes with Enhanced Mechanical and Electrochemical Properties Using Binders from Chemically Modified Cellulose Fibers

Carbons derived from regenerated spherical cellulose as anodes for Li‐ion batteries at elevated temperatures

Stable cycling and low-temperature operation utilizing amorphous carbon-coated graphite anodes for lithium-ion batteries

Catalytic Decomposition of Ethylene Carbonate by Pyrrolic-N to Stabilize Solid Electrolyte Interphase on Graphite Anode under Extreme Conditions

A Lignin-Based Carbon Anode with Long-Cycle Stability for Li-Ion Batteries

Low-cost carbon-silicon nanocomposite anodes for lithium ion batteries

Ionic liquid-induced low temperature graphitization of cellulose-derived biochar for high performance sodium storage

Porous carbon with the synergistic effect of cellulose fibers and MOFs as the anode for high-performance Li-ion batteries

Production of graphitic carbons from plant-based SiC/C nanocomposites for Li-ion batteries

Dissolution of Alkali Lignin in Ionic Liquid to Fabricate Nitrogen-Doped Carbon Microspheres for Electrochemical Supercapacitors

Diatomite and Glucose Bioresources Jointly Synthesizing Anode/Cathode Materials for Lithium-Ion Batteries

Improving the Performance of Biomass-Derived Carbons in Li-Ion Batteries by Controlling the Lithium Insertion Process

Uniform distribution of metallic lithium and carbon in nanoscale for highly stable carbon-based lithium metal anode

Lignin-derived Fused Electrospun Carbon Fibrous Mats As High Performance Anode Materials for Lithium Ion Batteries.

Structures, performances and applications of green biomass derived carbon in lithium-ion batteries

A porous carbon based on the surface and structural regulation of wasted lignin for long-cycle lithium-ion battery