Abstract:Rechargeable lithium-ion batteries (LIBs) have been increasingly popular in recent years in response to the growing need for large-scale energy storage applications and systems. However, due to the scarcity of lithium resources and their unequal distribution in the earth's crust, the present energy crisis has encouraged research into producing greener and more sustainable alternatives. Due to the relatively high abundance of sodium compared to lithium, sodium-ion batteries (SIBs) raise hope as an alternative and more sustainable chemistry.[1] Unfortunately, it is typically found that anode materials for LIBs are not suited for SIBs. Graphite, which is frequently used as an anode material in commercial LIBs, is incapable of achieving efficient Na + insertion/extraction due to a lack of interlayer spacing (Na + has a radius 39% bigger than Li + ) and high energy involved in the formation of Na-C bonds..[2] So, to develop mechanically flexible electrode materials that combine high electrochemical performance with low-cost is still a challenge for its applications in a world subjected to severe shortage of resources and various environmental issues. The problem can be solved by selecting "green" and economically viable precursors and synthesis procedures. Carbon nanofibers derived from renewable biomass materials exhibit great potential as electrode materials with obvious cost and environmental benefits. Lignin, a heterogeneous and amorphous polymer found in many plants, and it is estimated that annual natural lignin production is 5-36×10 8 tons, of which more than 70 million tons are commercialized mainly from the paper industry as a by-product, is a possible choice as the precursor for carbon nanofibers due to its low cost and bio-renewable nature. In this work, mechanically flexible and 3D interconnected lignin/polylactic acid (PLA) carbon nanofibers with different amounts of lignin were prepared by electrospinning, then stabilized and carbonized. The obtained carbon nanofibers were characterized by scanning electron microscopy and transmission electron microscopy to investigate their morphology. To determine the carbon yield thermogravimetric analysis has been performed. Surface area, pore radius and volume values were obtained by performing BET analysis from N 2 sorption isotherms. The obtained carbon nanofibers were tested as anode materiasl in 1 mol/L NaCF 3 SO 3 in diethylene glycol dimethyl ether (DEGDME) electrolyte. Results show that lignin derived carbon nanofibers deliver a high reversible capacity of 330 mAhg -1 at the current density of 100 mAg -1 in the first cycle. Additionally, these carbon nanofibers showed excellent cycling and high-rate performance and maintained a capacity of up to 200 mAhg -1 for over 200 cycles. It is therefore, demonstrated that lignin derived carbon nanofibers prepared under appropriate conditions are promising anode material candidates for sodium-ion batteries. References: [1] L. Yue, H. Zhao, Z. Wu, J. Liang, S. Lu, G. Chen, S. Gao, B. Zhong, X. Guo, X. Sun, Recent advances in electrospun one-dimensional carbon nanofiber structures/heterostructures as anode materials for sodium ion batteries, Journal of Materials Chemistry A, 8 (2020) 11493-11510. [2] M. Zhu, X. Kong, H. Yang, T. Zhu, S. Liang, A. Pan, One-dimensional coaxial Sb and carbon fibers with enhanced electrochemical performance for sodium-ion batteries, Applied Surface Science, 428 (2018) 448-454.

Lignin-derived Fused Electrospun Carbon Fibrous Mats As High Performance Anode Materials for Lithium Ion Batteries.

Porous Carbon Nanofiber Derived from a Waste Biomass As Anode Material in Lithium-Ion Batteries

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Binder-free SiO2 nanotubes/carbon nanofibers mat as superior anode for lithium-ion batteries

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

A Lignin-Based Carbon Anode with Long-Cycle Stability for Li-Ion Batteries

Sustainable Lignin-Based 3D Porous Carbon Nanofibers As a Na-Ion Battery Anode

High Areal Capacity Si/LiCoO2 Batteries from Electrospun Composite Fiber Mats

Electrospun Kraft Lignin/Cellulose Acetate-Derived Nanocarbon Network As an Anode for High-Performance Sodium-Ion Batteries.

Biomass Inspired Nitrogen Doped Porous Carbon Anode with High Performance for Lithium Ion Batteries

Fabrication of Carbon Nanofiber-Driven Electrodes from Electrospun Polyacrylonitrile/Polypyrrole Bicomponents for High-Performance Rechargeable Lithium-Ion Batteries

Flexible and crosslinking electrospun porous carbon nanofiber membranes as freestanding binder-free anodes for lithium-ion batteries

Highly Porous Carbon Nanofibers from Electrospun Polyimide/Sio2 Hybrids As an Improved Anode for Lithium-Ion Batteries

Carbon nanofibers derived from carbonization of electrospinning polyacrylonitrile (PAN) as high performance anode material for lithium ion batteries

Freestanding and Consecutive Intermixed N-Doped Hard Carbon@Soft Carbon Fiber Architectures as Ultrastable Anodes for High-Performance Li-Ion Batteries

Flexible Phosphorus Doped Carbon Nanosheets/nanofibers: Electrospun Preparation and Enhanced Li-storage Properties As Free-Standing Anodes for Lithium Ion Batteries

Hierarchical and Heterogeneous Porosity Construction and Nitrogen Doping Enabling Flexible Carbon Nanofiber Anodes with High Performance for Lithium-Ion Batteries

Self‐standing hard carbon anode derived from hyper‐linked nanocellulose with high cycling stability for lithium‐ion batteries

Electrospun N-doped Porous Carbon Nanofiber Webs As Anodes for Lithium-Ion Batteries

Synthesis and electrochemical properties of nitrogen-doped porous carbon for lithium ion batteries

Construction of multiwall carbon nanotubes/biomass-derived nitrogen-doped carbon@regenerated LiFePO4 cathode materials for lithium-ion batteries