Abstract:The formation of local temperature "hotspots" is demonstrated to be one of the triggers for dendritic lithium evolution by a thermal–electrochemical coupling simulation. To eliminate the "hotspots", a graphene‐layer‐coated thermal conductive separator is constructed to achieve homogeneous lithium deposition and even "recover" cycled undesirable lithium deposition, leading to a superior electrochemical performance paired with NCM811 cathode under a loading of 30 mg cm−2 and N/P ratio of 3.3. Practical lithium metal batteries (LMBs) are still far from market readiness, as a result of the severe Li degradation and safety issues caused by Li dendrites. Herein, by studying the thermodynamic behavior of lithium deposition, it is unveiled that the tip area of Li metal has an increasing heat generation rate as a function of the deposition time and overpotential. This triggers the emergence of the accumulated overpotential heat and local temperature "hotspots" due to poor local thermal diffusion, which exacerbates the undesirable irregular Li deposition and dendrite growth. To address this issue, a thermally conductive graphene‐coated separator is constructed to eliminate these local hotspots. The graphene layer affords timely diffusion of local heat generated by irregular Li growth and incipient dendrite formation, achieving the stable and uniform lithium deposition to deter further degradation. As a result, the Li metal, suffering a drastic Coulombic efficiency (CE) decay to ≈60% using a conventional separator, can be recovered for continual cycling with a high CE of >95%. Notably, the corresponding Li||LiNi0.8Mn0.1Co0.1O2 cells present high capacity retention and recovery. This study highlights the thermodynamic factor of Li dendrite‐induced local heat and its elimination to preclude Li anode deterioration, which provides insight into Li metal protection strategies for high performance LMBs.

Stable cycling and low-temperature operation utilizing amorphous carbon-coated graphite anodes for lithium-ion batteries

Bifunctional Interphase Promotes Li+ De‐Solvation and Transportation Enabling Fast‐Charging Graphite Anode at Low Temperature

Enabling the Low-Temperature Cycling of NMC||Graphite Pouch Cells with an Ester-Based Electrolyte

A new cyclic carbonate enables high power/ low temperature lithium-ion batteries

Oriented‐Etched Graphite for Low‐Temperature Lithium‐Ion Batteries

Uncovering the Function of a Five‐Membered Heterocyclic Solvent‐Based Electrolyte for Graphite Anode at Subzero Temperature

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Cathode Interfacial Engineering to Enhance Cycling Stability of Rechargeable Lithium-Ion Batteries

Boosting the Low-Temperature Performance of Graphite Anodes by Creating an Electrochemically Active Interface

Design of Gradient Porosity Architecture with Through‐Hole Carbon Spheres to Promoting Fast Charging and Low‐Temperature Workable Lithium‐Ion Batteries

Colloid Electrolyte with Changed Li+ Solvation Structure for High‐Power, Low‐Temperature Lithium‐Ion Batteries

Catalytic Decomposition of Ethylene Carbonate by Pyrrolic-N to Stabilize Solid Electrolyte Interphase on Graphite Anode under Extreme Conditions

Solvation and Interfacial Engineering Enable -40 °C Operation of Graphite/NCM Batteries at Energy Density over 270 Wh kg-1

Correlating Graphite Surface with Interphase for Fast‐Charging and Low‐Temperature Operation

Purification of spent graphite and surface modification with amorphous carbons as anodes for high-performance lithium-ion batteries

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries

Graphitic carbon nitride (g-C3N4) as an electrolyte additive boosts fast-charging and stable cycling of graphite anodes for Li-ion batteries

Utilization of surface-induced capacitive behavior: A promising strategy to improve low temperature performance of Li-ion batteries

A novel approach for synthesis of expanded graphite and its enhanced lithium storage properties

A Graphene‐Coated Thermal Conductive Separator to Eliminate the Dendrite‐Induced Local Hotspots for Stable Lithium Cycling

Ultrafast Charging and Stable Cycling Dual‐Ion Batteries Enabled via an Artificial Cathode–Electrolyte Interface