Abstract:Under mechanical loading, the strain hardening behavior of crystalline face-centered cubic (FCC) metals is of critical importance in determining fracture behavior and overall mechanical performance. While strain hardening is typically accompanied by a decrease in ductility, it can also simultaneously enhance the material's resistance to plastic deformation and improve its load bearing capacity. Hence, we conducted a detailed study using copper (Cu) single-crystal micropillars as a model system to investigate and delineate the relationship between strain hardening and defect behavior. We employed in situ compression in a scanning electron microscope (SEM) and dislocation density-based crystal plasticity (DCP) modeling. The strain hardening rate varied with the compression crystallographic orientation, ranging from negligible values (of approximately 80 MPa) to relatively high hardening rates (of approximately 1150 MPa) for nominal strains of up to 15%. Various analysis methods were applied, including slip trace characterization, electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and transmission Kikuchi diffraction (TKD). These techniques allowed us to identify the distributions of active slip systems, dislocation structures after compression, and correlated internal lattice rotations. Furthermore, the DCP model was developed to specifically understand how serration events are related to dislocation-density evolution or strain bursts, and this was validated with the micropillar experiments. This integrated experimental and modeling investigation offers valuable insights and predictions regarding the evolution of both total and partial dislocations, including Hirth and Lomer junctions, as well as lattice rotations.

Electrical conductivity characterized at varying strains in spiral cut high-pressure torsion discs

Strain effects on the wear rate of severely deformed copper

Softening and Microstructure Evolution of Pure Copper Disks Processed by High Pressure Torsion

Analysis of Heterogeneities in Strain and Microstructure in Aluminum Alloy and Magnesium Processed by High-Pressure Torsion

Correlation of structure development and electric characteristics within high pressure torsion processed copperKorrelation zwischen Mikrostrukturentwicklung und elektrischen Eigenschaften von durch Hochdruck‐Torsion verarbeitetes Kupfer

Microstructural Modification and Mechanical Improvement of Ultrafine-Grained Ti Alloy Through Electron Wind Force: an Innovative Approach

Microstructural Evolution and Micro‐Compression in High‐Purity Copper Processed by High‐Pressure Torsion

Evaluating High Pressure Torsion Scaleup

Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

Experimental Study on Pure Copper Subjected to Different Severe Plastic Deformation Modes

The Evolutions of Microstructure, Texture and Hardness of A1050 Deformed by HPT at the Transition Area

In situ Electrical Resistance Measurement of Pure Titanium during Severe Plastic Deformation by High‐Pressure Sliding

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

Axial Tensile Stress-Strain Characterization Of Bi-2212 Round Wire With Different Heat Treatments

Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion

Influence of grain shape and orientation on the mechanical properties of high pressure torsion deformed nickel

Strength and electrical conductivity of UFG Cu-Fe alloys subjected to HPT

A fundamental understanding of how dislocation densities affect strain hardening behavior in copper single crystalline micropillars

The microstructure and mechanical properties of copper in electrically assisted tension

Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

Strength enhancement of an aluminum alloy through high pressure torsion