Abstract:Introduction Structural transformations in titanium have received a great deal of experimental and theoretical attention. Under pressure, titanium transforms from the hexagonal-closedpacked (hcp) structure to the high-pressure omega phase. This phase transition from hcp (α) to omega (ω) is martensitic. Martensitic transformations are abundant in the nature and have tremendous scientific and technological interest. In particular, the pressure-induced martensitic α → ω transformation in pure titanium (Ti) has significant implications in the aerospace industry because the ω phase formation affects the toughness and ductility of Ti. The occurrence of the pressure-driven α → ω transformation was first observed by Jamieson [13] and has since been studied extensively. Room temperature (RT) high-pressure studies of the α → ω transition show a large hysteresis, with the high-pressure ω phase being retained after pressure is released [2, 3]. The onset of the transition has been observed over a wide range of pressures from 2.9 GPa [4] to 11 GPa [5]. One of the factors that could be responsible for this scatter in the observed transition pressure (Pα→ω) is possibly the variation in the non-hydrostatic conditions in different experiments. However, the combined results from different experiments are inconsistent with this fact. Then the question is whether the shear stress explanation is correct and whether other factors play a role in the transition. To answer this question, we conducted a series of experiments in a diamond-anvil cell (DAC) using different pressure media. In this study, we examined the effects of uniaxial stresses on the α → ω transition of Ti using synchrotron xray powder diffraction. Experiments were performed using a DAC and four different pressure media, which provided different hydrostatic conditions. We clearly demonstrated that the presence of uniaxial stresses has a significant effect on the structural stability of Ti. We also observed that shortterm laser-heating of Ti lowers Pα→ω.

In situ Electrical Resistance Measurement of Pure Titanium during Severe Plastic Deformation by High‐Pressure Sliding

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

X-ray diffraction of titanium under high pressures : a systematic analysis of the mechanism for the alpha to omega martensitic transformation

In situ quantitative study of plastic strain-induced phase transformations under high pressure: Example for ultra-pure Zr

Phase transformation mediated anomalous plasticity of titanium under severe loading conditions

Ultrahigh Deformability of Ti-6Al-4V Assisted by High-Density Pulsed Electric Current Treatment

Pressure-Induced Reversible Hcp to Fcc Phase Transition of Ti: A First-Principles Study

Properties of Commercial Pure Titanium under Self-Heating and High-Pressure Heating Treatment

Pressure-induced alpha-to-omega transition in titanium metal: A systematic study of the effects of uniaxial stress

lpha to O mega Ma rtensitic T ransformation

Nanostructuring of Additively Manufactured 316L Stainless Steel Using High-Pressure Torsion Technique: An X-ray Line Profile Analysis Study

Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

Effect of High-Pressure Torsion on Phase Formation and Mechanical Properties of a High-Entropy TiZrHfMoCrCo Alloy

Plastic Deformation Mechanism and Slip Transmission Behavior of Commercially Pure Ti during In Situ Tensile Deformation

Pressure-driven structural transformation and lattice deformation in TiB reinforced titanium matrix composites: An in-situ synchrotron x-ray diffraction study

In Situ Observation of Deformation Behavior of Ti6Al4V Subjected to Electrically-Assisted Forming Process

ASB induced phase transformation in high oxygen doped commercial purity Ti

Phase Transformations in Titanium: Anisotropic Deformation of Ω Phase

Surface sliding revealed by operando monitoring of high-pressure torsion by acoustic emission

Precession Electron Diffraction Assisted Characterization of Deformation in Α and Α+β Titanium Alloys

High Pressure Phase-Transformation Induced Texture Evolution and Strengthening in Zirconium Metal: Experiment and Modeling