Abstract:High-pressure-torsion (HPT) processing introduces a large density of dislocations that form sub-grain boundaries within the refined nano-scale structure, leading to changes in precipitate morphology compared to hot-rolled maraging steels. The impact of such nanostructuring on the deformation and fracture micro-mechanisms is being reported for the first time usingin situcharacterization techniques along with transmission electron microscopy and atom probe tomography analysis, in this study. Digital image correlation has been used to quantify the full field strain maps in regions of severe strain localization as well as to determine the fracture toughness through critical crack tip opening displacements. It is seen that the phenomenon of planar slip leads to strain softening under uniaxial deformation and to crack branching under a triaxial stress state in hot rolled maraging steels. On the other hand, nano-structuring after HPT processing creates a large number of high angle grain boundaries as dislocation barriers, leading to strain hardening under uniaxial tension and nearly straight crack path with catastrophic fracture under triaxial stress state. Upon overaging, the hot-rolled sample shows signature of transformation induced plasticity under uniaxial tension, which is absent in the HPT processed overaged samples, owing to the finer reverted austenite grains containing higher Ni concentration in the latter. In the overaged fracture test samples of both the hot-rolled and HPT conditions, crack tips show a signature of strain induced transformation of the reverted austenite to martensite, due to the accompanying severe strain gradients. This leads to a higher fracture toughness even while achieving high strengths in the overaged conditions of the nanocrystalline HPT overaged samples. The results presented here will aid in design of suitable heat treatment or microstructure engineering of interface dominated nano-scale maraging steels with improved damage tolerance.

Surface sliding revealed by operando monitoring of high-pressure torsion by acoustic emission

Coupling of surface and volume behaviors to understand the generation of TTS in pure magnesium proceeded by HPT

Analysis of Heterogeneities in Strain and Microstructure in Aluminum Alloy and Magnesium Processed by High-Pressure Torsion

Acoustic emission detection of micro-cracks under high pressure and high temperature in a deformation large-volume apparatus at the endstation P61B, PETRA III

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

In situ Electrical Resistance Measurement of Pure Titanium during Severe Plastic Deformation by High‐Pressure Sliding

The Evolutions of Microstructure, Texture and Hardness of A1050 Deformed by HPT at the Transition Area

Microstructure Evolution during High-Pressure Torsion in a 7xxx AlZnMgZr Alloy

High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties

Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

A Comparative Study of a Machine Learning Approach and Response Surface Methodology for Optimizing the HPT Processing Parameters of AA6061/SiCp Composites

Evaluating High Pressure Torsion Scaleup

Micro-mechanisms of failure in nano-structured maraging steels characterised through in situ mechanical tests

Grain Refinement Mechanism under High Strain-Rate Deformation in Machined Surface During High Speed Machining Ti6Al4V

Influence of HPT and Accumulative High-Pressure Torsion on the Structure and Hv of a Zirconium Alloy

In situ quantitative study of plastic strain-induced phase transformations under high pressure: Example for ultra-pure Zr

Nanostructuring of Additively Manufactured 316L Stainless Steel Using High-Pressure Torsion Technique: An X-ray Line Profile Analysis Study

Modeling and finite element simulation of polypropylene behavior under severe plastic deformation by high-pressure torsion

Grain Boundary Sliding during High Pressure Torsion of Nanocrystalline Au‐13Pd alloy

Deformation mechanisms in the α phase of the Ti-6Al-2Sn-4Zr-2Mo titanium alloy: in situ experiments and simulations

Evolution of microstructure and texture during severe plastic deformation of the aluminium alloy AA2099