Abstract:Severe plastic deformation (SPD) technology is the most effective method for producing nanomaterials. Among the SPD processes, high-pressure torsion (HPT) stands out as a promising technique for generating substantial shear strain. It has attracted considerable attention as a novel processing method for nanostructured materials. This is primarily due to its unique ability to subject the material to infinitely large strains and to induce extensive plastic deformation without causing significant changes in the cross section of the sample. In this paper, a phenomenological elastic-viscoplastic constitutive model has been experimentally identified and coupled with the three-dimensional finite element method to investigate the different processing parameters governing the deformation behavior of polypropylene (PP) during the HPT process. The plastic deformation behavior of polypropylene (PP) resulting from the HPT process has been investigated. The effects of various HPT process parameters such as process sequences, compression displacement, torsion angle, angular velocity, and sample dimensions are presented and discussed. The results provide insight into the correlation between process parameters and the evolution of equivalent plastic strain, indicating that an increase in sample radius, compression displacement, and torsion angle leads to a higher equivalent plastic strain. A non-uniform distribution of equivalent plastic strain is observed, particularly in the radial direction, with higher values observed at the sample periphery.

Incremental high pressure torsion as a novel severe plastic deformation process: Processing features and application to copper

High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties

Evaluating High Pressure Torsion Scaleup

Modeling and finite element simulation of polypropylene behavior under severe plastic deformation by high-pressure torsion

Correlation of structure development and electric characteristics within high pressure torsion processed copperKorrelation zwischen Mikrostrukturentwicklung und elektrischen Eigenschaften von durch Hochdruck‐Torsion verarbeitetes Kupfer

Severe Plastic Deformation of Light Metals (Magnesium, Aluminum and Titanium) and Alloys by High-Pressure Torsion: Review of Fundamentals and Mechanical/Functional Properties

Microstructural Evolution and Micro‐Compression in High‐Purity Copper Processed by High‐Pressure Torsion

Strain effects on the wear rate of severely deformed copper

High-Pressure Torsion for Synthesis of High-Entropy Alloys

Strength enhancement of an aluminum alloy through high pressure torsion

The Evolvement of Mechanical Properties and Microstructure of Commercial Aluminum Alloy 6061 via High-Pressure Torsion

Softening and Microstructure Evolution of Pure Copper Disks Processed by High Pressure Torsion

Influence of Processing Parameters on the Mechanical Properties of HPT-Deformed Nickel Carbon Nanotube Composites

Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion

Development of Advanced Technologies for the Production of Innovative Materials with a Submicrocrystalline Structure by Methods of Severe Plastic Deformation

Incremental strain gradient plasticity model and torsion simulation of copper micro-wires

Analysis of Heterogeneities in Strain and Microstructure in Aluminum Alloy and Magnesium Processed by High-Pressure Torsion

Nanostructuring of Additively Manufactured 316L Stainless Steel Using High-Pressure Torsion Technique: An X-ray Line Profile Analysis Study

On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of Composite from 5056 and 1580 Aluminum Alloys Produced with Wire Arc Additive Manufacturing