Abstract:High-pressure-torsion (HPT) processing introduces a large density of dislocations that form sub-grain boundaries within the refined nano-scale structure, leading to changes in precipitate morphology compared to hot-rolled maraging steels. The impact of such nanostructuring on the deformation and fracture micro-mechanisms is being reported for the first time usingin situcharacterization techniques along with transmission electron microscopy and atom probe tomography analysis, in this study. Digital image correlation has been used to quantify the full field strain maps in regions of severe strain localization as well as to determine the fracture toughness through critical crack tip opening displacements. It is seen that the phenomenon of planar slip leads to strain softening under uniaxial deformation and to crack branching under a triaxial stress state in hot rolled maraging steels. On the other hand, nano-structuring after HPT processing creates a large number of high angle grain boundaries as dislocation barriers, leading to strain hardening under uniaxial tension and nearly straight crack path with catastrophic fracture under triaxial stress state. Upon overaging, the hot-rolled sample shows signature of transformation induced plasticity under uniaxial tension, which is absent in the HPT processed overaged samples, owing to the finer reverted austenite grains containing higher Ni concentration in the latter. In the overaged fracture test samples of both the hot-rolled and HPT conditions, crack tips show a signature of strain induced transformation of the reverted austenite to martensite, due to the accompanying severe strain gradients. This leads to a higher fracture toughness even while achieving high strengths in the overaged conditions of the nanocrystalline HPT overaged samples. The results presented here will aid in design of suitable heat treatment or microstructure engineering of interface dominated nano-scale maraging steels with improved damage tolerance.

On the reinforcement homogenization in CNT/metal matrix composites during severe plastic deformation

Study of the structural defects on carbon nanotubes in metal matrix composites processed by severe plastic deformation

Microstructural evolution during heating of CNT/Metal Matrix Composites processed by Severe Plastic Deformation

Influence of Processing Parameters on the Mechanical Properties of HPT-Deformed Nickel Carbon Nanotube Composites

High-Pressure Torsion Deformation Induced Phase Transformations and Formations: New Material Combinations and Advanced Properties

The Evolutions of Microstructure, Texture and Hardness of A1050 Deformed by HPT at the Transition Area

CNT-induced heterogeneous matrix grain structure in CNTs/Al composites

Microstructures and properties of graphene nanoplatelets reinforced Cu/Ti3SiC2/C nanocomposites with efficient dispersion and strengthening achieved by high-pressure torsion

Effect of Strain Heterogeneities on Microstructure, Texture, Hardness, and H-Activation of High-Pressure Torsion Mg Consolidated from Different Powders.

Deformation-Driven Processing of CNTs/PEEK Composites towards Wear and Tribology Applications

Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

Mechanical Properties of the Pt-CNT Composite under Uniaxial Deformation: Tension and Compression

Mechanical properties and microstructure evolution of VGCNF reinforced 7075Al composite during high pressure torsion

Strain Rate Sensitivity and Deformation Mechanism of Carbon Nanotubes Reinforced Aluminum Composites

Microstructural Evolution and Deformation Mechanisms of in‐situ TiC Reinforced Ti‐6Al‐4V Composites during High‐Temperature Hot Compression

Micro-mechanisms of failure in nano-structured maraging steels characterised through in situ mechanical tests

On nanostructured molybdenum-copper composites produced by high pressure torsion

Severe plastic deformation of two-phase TiNiCuNb shape memory alloy

Studying the Plastic Deformation of Cu-Ti-C-B Composites in a Favorable Stress State

Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion

Deformation Behaviors and Processing Maps of CNTs/Al Alloy Composite Fabricated by Flake Powder Metallurgy