Abstract:<p>Graphene nanoplates (GNPs) reinforced TC21(Ti-6Al-2Sn-2Zr-3Mo-1Cr-2Nb-Si) (GNPs/TC21) composites were prepared by using spark plasma sintering (SPS). Microstructure, mechanical and tribological properties of the sintered GNPs/TC21 composites were systematically investigated. Microstructural observations demonstrated the formation of a special sandwich interface product is in-situ TiC coated GNPs () bands and TiC particles/plates in the microstructure of the sintered GNPs/TC21 composites. Results of mechanical testing indicated the excellent combination of strength and ductility of GNPs/TC21 composites owing to the dispersion strengthening effects of TiC particles/plates as well as the load transfer between bands and TC21 matrix. GNPs/TC21 composite with 0.05 wt% GNPs addition exhibits the relatively excellent mechanical properties, i.e., yield strength of 1017.2 MPa, ultimate tensile strength of 1161.99 MPa and an elongation about 13.2%. Among them, the dispersion strengthening effect of TiC particles/plate was the dominant factor in 0.05 wt% GNPs /TC21 composites. When the GNPs content exceeds 0.1 wt%, TiC particles/plates and bands formed at grain boundaries. The excellent combination of strength and ductility of GNPs/TC21 composites owing to the dispersion strengthening effects of TiC particles/plates as well as the load transfer between bands and TC21 matrix. Furthermore, additions of GNPs have significantly improved the tribological properties of the sintered GNPs/TC21 composites. The wear loss of 0.05 wt% GNPs/TC21 composite decreased by 21% compared to that of the sintered TC21 alloy. The superior mechanical and tribological performances of GNPs/TC21 composites can be attributed to the unique strengthening effect and the lubricating efficiency of GNPs. This demonstrates that GNPs is an ideal filler for TC21 matrix composites, as the effective lubricant and favorable reinforcement.</p>

Microstructures and properties of graphene nanoplatelets reinforced Cu/Ti3SiC2/C nanocomposites with efficient dispersion and strengthening achieved by high-pressure torsion

Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture

Achieving balanced strength-ductility of heterostructured TiC/graphene nanoplatelets (GNPs) reinforced Al matrix composites by tuning TiC-to-GNPs ratio

Strengthening Effects of In-Situ Synthetic Nano-Tic Particles on Ti64 Based Nanocomposites Through Adding Graphene Nanoplatelets

Mechanical and tribological properties of graphene nanoplatelets-reinforced titanium composites fabricated by powder metallurgy

Mechanical properties and microstructure evolution of VGCNF reinforced 7075Al composite during high pressure torsion

Tailoring Strength-Ductility of Titanium Matrix Composites Reinforced with Graphene Nanoplatelets

Enhanced interfacial bonding and mechanical properties of (TiC p +GNPs)/Cu composites by Ti-induced GNPs/Cu interfacial modification

Effects of mixing methods on the interface and microstructure evolution of graphene platelets/Ti-6Al-4V powder composites fabricated by powder metallurgy and extrusion

Mechanical Properties of TC11 Titanium Alloy and Graphene Nanoplatelets/TC11 Composites Prepared by Selective Laser Melting

In-situ synthesized TiC/Ti-6Al-4V composites by elemental powder mixing and spark plasma sintering: Microstructural evolution and mechanical properties

Simultaneously Enhancing the Strength and Ductility in Titanium Matrix Composites Via Discontinuous Network Structure

Influence of GNPs@Cu on high-temperature mechanical and thermal properties of laminated MTZ composites

Uniformly Dispersing GNPs for Fabricating Graphene-Reinforced Pure Ti Matrix Composites with Enhanced Strength and Ductility

Enhanced mechanical and tribological properties of graphene nanoplates reinforced TC21 composites using spark plasma sintering

Interfacial Design of Graphene Nanoplate Reinforced Copper Matrix Composites for High Mechanical Performance

Microstructure and properties of graphite nanoflakes/Cu matrix composites fabricated by pressureless sintering and subsequent thermo-mechanical treatment

Achieving high strength and superior wear‐resistant properties in TiH2 matrix reinforced with graphene nanoplates

Effect of sintering temperature on microstructure and properties of graphene nanoplatelets reinforced TC21 composites prepared by spark plasma sintering

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

Synergetic Effect of Graphene and MWCNTs on Microstructure and Mechanical Properties of Cu/Ti3SiC2/C Nanocomposites