Deformation-induced homogenization of the multi-phase senary high-entropy alloy MoNbTaTiVZr processed by high-pressure torsion

Chuyi Duan,Aleksander Kostka,Xiaohu Li,Zirong Peng,Peter Kutlesa,Reinhard Pippan,Ewald Werner

DOI: https://doi.org/10.1016/j.msea.2023.144923

2023-06-09

Abstract:Dendritic microstructures are frequently observed in as-solidified refractory high-entropy alloys (RHEAs), and their homogenization typically requires a long-term heat treatment at extremely high temperatures. High-pressure torsion (HPT) has been shown to be capable of mixing immiscible systems at room temperature, and therefore represents a promising technique for homogenizing dendritic RHEAs. In this work, the as-solidified RHEA MoNbTaTiVZr was processed up to 40 revolutions by HPT. It was found that the dendritic microstructure was eliminated, resulting in a chemical homogeneity at a von Mises equivalent shear strain of about 400. The study of deformation mechanism showed an initial strain localization, followed by a co-deformation of the dendritic and interdendritic regions. In the co-deformation step, the Zr-rich interdendritic region gradually disappeared. The deformation-induced mixing also led to the formation of an ultra-fine grained (UFG) microstructure, exhibiting a grain size of approximately 50 nm. The microhardness increased from 500 HV in the as-solidified to 675 HV in the homogenized UFG state. The underlying mechanisms responsible for the microhardness enhancement, such as grain refinement and solid solution strengthening, were also discussed.

Materials Science