Abstract:To make up for the poor strength of high plasticity NbTa 0·5 Ti refractory medium entropy alloys (MEAs), light metal Al was introduced as alloying element. In this work, the NbTa 0·5 Ti-Al x ( x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) series non-isoatomic refractory high entropy alloys (RHEAs) were prepared by arc melting, and phase equilibrium was predicted by CALPHAD. The effects of Al content and annealing temperature on microstructure and phase evolution, and its mechanical properties were studied. The NbTa 0·5 Ti-Al x alloys changed from single phase BCC to two-phase A2+B2 crystal structure after adding Al. The hardness and strength of the as-cast alloys are increased by the solution strengthening and precipitation strengthening effect, but the brittleness is increased. The precipitation of Laves of plate-like NbAlTi 2 and finer-scale A15 of (needle, particle)-like AlTi 3 precipitates at and near grain boundaries after annealing. Higher annealing temperature is beneficial to eliminate dendrites formed by element segregation in the arc melting cooling process and promote grain growth (up to ∼200 μm). This work designed a new alloys with excellent compression plasticity and enriched the field of composition design and aging treatment of the Al-containing second generation RHEAs, so that their microstructure can be better controlled to achieve a balance of strength and plasticity.

Controlling microstructure and mechanical properties of Ti-V-Cr-Nb-Ta refractory high entropy alloys through heat treatments

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Composition control and heat treatment effect on characteristics of ZrNbTaHf x refractory high entropy alloys

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Design crystallographic ordering in NbTa 0.5 TiAl x refractory high entropy alloys with strength-plasticity synergy

Microstructures and mechanical properties of Ta–Nb–Zr–Ti–Al refractory high entropy alloys with varying Ta/Ti ratios

First-principles calculations to investigate phase stability, elastic and thermodynamic properties of TiMoNbX (X=Cr, Ta, Cr and Ta) refractory high entropy alloys

Effect of Ti and Nb Contents on Microstructure and Mechanical Properties of HfZrVTaMoWTi x Nb y Refractory High‐Entropy Alloys

Effect of Cr content on microstructure characteristics and mechanical properties of ZrNbTaHf0.2Crx refractory high entropy alloy

Phase Stability and Microstructural Evolution in a Ductile Refractory High Entropy Alloy Al 10 Nb 15 Ta 5 Ti 30 Zr 40

Microstructure Modification and Ductility Improvement for TaMoNbZrTiAl Refractory High Entropy Alloys via Increasing Ti Content

Effects of Alloying Elements and Mechanical Alloying on Characteristics of WVTaTiCr Refractory High-Entropy Alloys

Microstructure evolution and mechanical properties of NbHfTiVCx novel refractory high entropy alloys with variable carbon content

Microstructure and Mechanical Properties of TaNbVTiAlx Refractory High-Entropy Alloys

The Microstructures, Mechanical Properties, and Deformation Mechanism of B2-Hardened NbTiAlZr-Based Refractory High-Entropy Alloys

Microstructures and mechanical properties of TiZrHfNbTaWx refractory high entropy alloys

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi

Microstructure and mechanical properties of lightweight Al CrNbTiV(x = 0.2, 0.5, 0.8) refractory high entropy alloys

Effects of Ti content on the tensile ductility, lattice distortion and mechanical properties of VNbTaTi x refractory high-entropy alloys

Microstructure Evolution and Mechanical Properties of High Nb-TiAl Intermetallic Compounds during Heat Treatment

Grain growth and Hall–Petch relationship in Ti_37V_15Nb_22Hf_23W_3 refractory high-entropy alloys