Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Morphological Characteristics of W/Cu Composite Nanoparticles with Complex Phase Structure Synthesized via Reactive Radio Frequency (RF) Thermal Plasma

Long-term Ball Milling and Hot Pressing of In-Situ Nanoscale Tungsten Carbides Reinforced Copper Composite and Its Characterization

Performance of a Hierarchically Nanostructured W–Cu Composite Produced via Mediating Phase Separation

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Microstructural evolution of Cu/W nano-multilayers filler metal during thermal treatment

Multiphase strengthening mechanism of Cu-Y2O3/W composites prepared by mechanical alloying

Nanostructured Composite Obtained by Mechanically Driven Reduction Reaction of Cuo and Al Powder Mixture

PREPARATION OF ULTRAFINE W–Cu COMPOSITE POWDER USING ULTRASONIC-ASSISTED ELECTROLESS PLATING

Tribological and Corrosion Behaviors of Bulk CuW Nanocomposites Fabricated by Mechanical Alloying and Warm Pressing

High-temperature mechanical and electrical properties of W-particle-reinforced Cu-matrix composites from improved electroless plated powders

Phase Evolution of Mo-W-Cu Alloy Rapid Prepared by Spark Plasma Sintering

Preparation and properties of W-Mo-Cu composite using solution combustion synthesized W Mo solid solution nanopowder

Microstructure and Properties of W Cu Composites with Low Copper Content at Different Sintering Temperatures

Microstructure and high-temperature mechanical properties of Cu-W composite prepared by hot isostatic pressing

In Situ Synthesis of Core-Shell W-Cu Nanopowders for Fabricating Full-Densified and Fine-Grained Alloys with Dramatically Improved Performance

Effect of sintering temperature on fine-grained Cu W composites with high copper

Strengthening of Copper with Homogeneous Dispersion of Nanoscale Tungsten Particles Fabricated by Spark Plasma Sintering

Novel synthesis of CuW composite reinforced with lamellar precipitates via aluminothermic reduction

Electroless Copper Plating of Tungsten Powders and Preparation of WCu20 Composites by Microwave Sintering

Microstructural studies of W–10wt.% Cu composites prepared by using ultrafine composite powder

Ultrahigh strength, thermal stability and high thermal conductivity in hierarchical nanostructured Cu-W alloy