Abstract:The thickness of semiconductor thin films stands as a pivotal parameter dictating their operational efficacy, directly shaping their applications in the realms of electronics and optoelectronics. Nevertheless, the quandary of measuring the thickness of widely utilized hundred-micron-scale semiconductor wafers continues to vex researchers. Existing measurement techniques grapple with issues of inadequate precision, poor stability, and sluggish measurement speeds. To surmount this challenge, this study innovatively devises a method employing reflective spectral fitting technology for film thickness measurement coupled with adaptive correction. This approach integrates an enhanced frequency fitting technique, endowing it with the capability for swift and stable measurements of hundred-micron-scale semiconductor thin films. Simultaneously, addressing measurement errors stemming from complex environmental factors in industrial production, the paper proposes a thickness correction method based on carrier interference principles. This correction method ensures precise thickness calibration even when the sample isn't perfectly perpendicular to incident light, significantly augmenting measurement accuracy and stability. Experimental data demonstrates that employing the proposed methodology enhances measurement accuracy by approximately 50 % and elevates measurement stability by about 80 % compared to existing methods. Particularly noteworthy is its capability to maintain high measurement precision and stability even when the sample isn't entirely perpendicular to incident light. The calibrated measurements exhibit around a 55 % reduction in error compared to uncorrected results. This study presents an efficient and accurate solution for the challenging task of measuring hundred-micron-scale semiconductor thin film thickness in industrial settings.

Measurement and Error Analysis of Cu Film Thickness With Ta Barrier Layer on Wafer for CMP Application

Cu Layer Thickness Monitoring in CMP Process by Using Eddy Current Sensor

In-situ measurement of Cu film thickness during the CMP process by using eddy current method alone

Thickness Measurement Based on Eddy Current Sensor with Coaxial Double Coil for Chemical Mechanical Polishing

Signal Processing and Analysis for Copper Layer Thickness Measurement Within a Large Variation Range in the CMP Process.

Edge Effects of an Eddy-Current Thickness Sensor During Chemical Mechanical Polishing

Metal Thickness Measurement System Based on a Double-Coil Eddy-Current Method with Characteristic Ratio Detection.

Computational Investigation of a Novel Metal Thickness Measurement System with Coaxial Triple-Coil Sensor for Chemical Mechanical Polishing

In-situ Cu Layer Thickness Measurement During Chemical Mechanical Planarization

A Reliable Control System for Measurement on Film Thickness in Copper Chemical Mechanical Planarization System.

Improvement of Sensitivity of Eddy Current Thickness Sensors with Ferrite Core for CMP Process

Global Thickness Measurement System for Metal Layer on Wafer

A New Method for Measuring Multilayer Thickness Using a Chromatic Confocal Sensor

Eddy Current Measurement of the Thickness of Top Cu Film of the Multilayer Interconnects in the Integrated Circuit (IC) Manufacturing Process

A method for measuring and correcting errors in the thickness of semiconductor thin films based on reflection spectroscopy fitting technology

Study on elastic modulus of ultra-thin copper films by in-situ SEM-SPM nanoindentation

Failure Mechanism of 5 Nm Thick Ta–Si–C Barrier Layers Against Cu Penetration at 750–800°C

Characterization of submicrometer thickness of copper film on silicon wafer by using pulsed eddy current method

Contactless Measurement Of Electrical Conductivity Of Si Wafers Independent Of Wafer Thickness

Design and Fabrication of Ultrathin and Highly Thermal-Stable Α-Ta/graded Ta(N)/TaN Multilayer As Diffusion Barrier for Cu Interconnects

In-situ Measurement Methods of the Metal Layer Thickness on Wafer with Nanometer Precision