Abstract:Samarium cobalt permanent magnets have been widely used for their excellent intrinsic magnetic properties such as very high Curie temperature, high anisotropy fields and most importantly excellent temperature coefficients of induction and coercivity. These materials have continuing industrial interest especially for applications operating at elevated temperatures and in the presence of high demagnetizing fields, such as particle accelerators, high frequency traveling wave tubes (TWTs), servo-motors and automotive and aerospace applications. An area of opportunity for improving performance of SmCo magnets is increasing magnet toughness — resistance to fracture. Like all other sintered rare earth magnetic materials, SmCo magnets are based on intermetallic compounds which are intrinsically brittle and can crack in the course of fabrication, machine work, and installation in the application. Increased toughness would also reduce handling sensitivity of magnetized magnets. For many years, studies on SmCo magnets have been focused on their magnetic properties, but the mechanical characteristics, strengthening and toughening mechanisms have been rarely reported. Understanding the phase and structural transformations induced in the SmCo magnets during the manufacturing process offers insight into potential modifications — chemical or processing-related. In this study, microstructural characterizations of 1:5 and 2:17 Sm-Co magnets were carried out using optical and scanning electron microscopes. In scanning electron microscopy (SEM), backscattered electron imaging and energy dispersive X-ray (EDX) microanalysis were used to investigate different phases and oxides. Finally, crystal structure of the magnets was studied using an X-ray diffractometer (XRD). The study correlates the microstructure characterization with the thermal processing history of different grades of SmCo magnets.

Influence of Severe Plastic Deformation on the Magnetic Properties of Sm‐Co Permanent Magnets

Strain Induced Anisotropic Magnetic Behaviour and Exchange Coupling Effect in Fe-SmCo$_{5}$ Permanent Magnets Generated by High Pressure Torsion

Manufacturing of Textured Bulk Fe-SmCo$_{5}$ Magnets by Severe Plastic Deformation

Structure and magnetic properties of nanocrystalline SmCo5 and SmCo3Cu2 prepared by using high-pressure torsion method

Influence of amorphous phase on coercivity in SmCo5-Cu nanocomposites

Tuneable Magneto-Resistance by Severe Plastic Deformation

Magnetic Materials via High-Pressure Torsion of Powders

Microstructural Characterization of Sm-Co Magnets

Magnetic Characterization of HPT-deformed Fe-Si Soft Magnetic Alloys Before and After Heat Treatment and Internal Stress Calculations

On the magnetic nanostructure of a Co-Cu alloy processed by high-pressure torsion

Phase separation and chemistry evolution in Fe-rich Sm(CobalFe0.31Cu0.07Zr0.025)7.7 magnets: The effect of initial defect

Coercivity mechanism of high-performance anisotropic heterostructure SmCo 5 magnets

Optimization of the magnetic properties of FePd alloys by severe plastic deformation

Unveiling the enhancement of mechanical properties in cryogenic-treated Sm 2 Co 17 permanent magnets without sacrifice of magnetic properties

Microstructural Changes Influencing the Magnetoresistive Behavior of Bulk Nanocrystalline Materials

Unconventional magnetization textures and domain-wall pinning in Sm-Co magnets

Can Severe Plastic Deformation Tune Nanocrystallization in Fe-Based Metallic Glasses?

Dislocation-mediated plasticity in the intermetallic SmCo 5 phase

Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing

Mechanical properties of samarium cobalt: A molecular dynamics study

Magnetostrictive Behavior of Severe Plastically Deformed Nanocrystalline Fe-Cu Materials