Abstract:In this study, high-performance Cu–0.69Cr–0.46Co–0.34Ti (wt%) alloys with nano-precipitates and nanotwins are prepared via a two-step cryorolling and aging process. The effects of Co and Ti on the microstructural evolution as well as room-temperature and elevated-temperature mechanical behaviors are investigated. The results show that the two-step process produces high-density dislocations, profuse nanotwins into Cu–Cr–Co–Ti alloys, and enhances the mechanical properties of the latter significantly. The high-density dislocations provide sufficient diffusion paths for Cr atoms and accelerate the transformation of Cr precipitates from face-centered cubic (fcc) to body-centered cubic (bcc), resulting in the co-existence of coherent fcc Cr and incoherent bcc Cr precipitates. Dislocation strengthening and Orowan precipitation strengthening contribute significantly to the strength of the Cu–Cr–Co–Ti alloys. The tensile strength (643 MPa), hardness (201 HV), and electrical conductivity (64.75% IACS) of samples subjected to the two-step process are obtained. Results show that a CoTi compound shell inhibits the diffusion of external Cr atoms to the core and restrains the coarsening of Cr precipitates. Meanwhile, stable nano-precipitates and nanotwins decelerate the progress of recrystallization, thus improving the elevated-temperature mechanical behavior.

Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing

On the magnetic nanostructure of a Co-Cu alloy processed by high-pressure torsion

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Tailoring the microstructure and properties of a Cu–Co immiscible alloy by high magnetic field assisted heat treatment

Structure and magnetic properties of nanocrystalline SmCo5 and SmCo3Cu2 prepared by using high-pressure torsion method

Microstructural Changes Influencing the Magnetoresistive Behavior of Bulk Nanocrystalline Materials

Eff ects of Diff erent Mechanical Alloying Parameters on Microstructure of High Temperature Nanocrystalline Cu-Ta Alloys

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

Phase separation of a supersaturated nanocrystalline Cu Co alloy and its influence on thermal stability

On the remarkable thermal stability of nanocrystalline cobalt via alloying

Effect of Minor Addition of Co on Nonequilibrium Solidification of Deeply Undercooled Cu Based Alloys

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Oxide-stabilized microstructure of severe plastically deformed CuCo alloys

Effect of temperature on mechanical behavior of Cu–Cr–Co–Ti alloys

Amorphous-Nanocrystalline Composites Prepared by High-Pressure Torsion

On nanostructured molybdenum-copper composites produced by high pressure torsion

Tuneable Magneto-Resistance by Severe Plastic Deformation

Influence of Severe Plastic Deformation on the Magnetic Properties of Sm‐Co Permanent Magnets

Magnetostrictive Behavior of Severe Plastically Deformed Nanocrystalline Fe-Cu Materials

Influence of amorphous phase on coercivity in SmCo5-Cu nanocomposites

Nano-scale precipitates formed in Cu-Co based alloys and their magnetic properties