Abstract:In this study, vapor-grown carbon nanofibers (VGCNF) reinforced 7075Al nanocomposites were prepared by spark plasma sintering (SPS) combined with high-pressure torsion (HPT) secondary deformation. The evolution of mechanical properties and microstructure of the composites during HPT was systematically investigated, while the role of VGCNF in material strengthening was discussed. Key findings demonstrated that the 2%VGCNF/7075Al composite prepared by SPS + HPT exhibited good microstructure homogeneity and excellent mechanical properties with continuous and well-bonded interfaces. The microhardness reached saturation when γ = 25, maintaining the strain-hardening ability. At 5T of HPT, the ultimate tensile strength and elongation increased by 167.32% and 58.28% respectively, compared with undeformed samples. The common improvement of strength and plasticity was realized. VGCNF played a role in deflecting the crack propagation path after HPT and improved the plastic deformation ability of the material. With the increase of HPT turns, the grain size gradually decreased to about 80 nm, and the dislocation density gradually tended to saturation. The precipitation and resolution of the second phase occurred. In order to clarify the strengthening mechanism of the composite after HPT and to quantify the contribution of each correlated strengthening mechanism to the strength, a theoretical model for strengthening after adding VGCNF was established.

Amorphous-Nanocrystalline Composites Prepared by High-Pressure Torsion

On nanostructured molybdenum-copper composites produced by high pressure torsion

Atomic Structure of Ti2NiCu Alloy after Severe Plastic Deformation by High Pressure Torsion and Heat Treatment

Microstructure And Magnetic Properties Of Bulk Nanocomposite Magnets Prepared By Crystallizing Amorphous Nd3.6pr5.4fe80co3b7nb1 Under High Pressure

Tailoring the magnetic properties of nanocrystalline Cu-Co alloys prepared by high-pressure torsion and isothermal annealing

Effect of High Pressure on Microstructure of Crystallizing Amorphous Nd9Fe85B6 Alloy

Highly Pressurized Helium Nanobubbles Promote Stacking-Fault-mediated Deformation in FeNiCoCr High-Entropy Alloy

Microstructure and magnetic properties of bulk nanocomposite magnets prepared by crystallizing amorphous Nd<sub>3.6</sub>Pr<sub>5.4</sub>Fe<sub>80</sub>Co<sub>3</sub>B<sub>7</sub>Nb<sub>1</sub>under high pressure

Structure and magnetic properties of nanocrystalline SmCo5 and SmCo3Cu2 prepared by using high-pressure torsion method

On the magnetic nanostructure of a Co-Cu alloy processed by high-pressure torsion

Microstructural and texture evolution of copper-(chromium, molybdenum, tungsten) composites deformed by high-pressure-torsion

Strain-Hardening Stages and Structure Evolution in Pure Niobium and Vanadium upon High Pressure Torsion

Physical and Mechanical Properties of the Amorphous and Nanocrystalline Alloys

Magnetic Shape Memory Nanocomposites Assembled with High Speed High Pressure Torsion

Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

Structure and cryogenic mechanical properties of severely deformed nonequiatomic alloys of Fe–Mn–Co–Cr system

Unraveling the Deformation Behavior of the Fe45Co25Ni10V20 High Entropy Alloy

Microstructure and tensile properties of high-entropy alloy Al0.5CoCrFeNi particles reinforced Ti/Al laminated composite

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

Influence of amorphous phase on coercivity in SmCo5-Cu nanocomposites

Mechanical properties and microstructure evolution of VGCNF reinforced 7075Al composite during high pressure torsion