Abstract:In this study, structural, morphological, thermal and magnetic properties of amorphous-nanocrystalline Fe 70 Cr 10 Nb 10 B 10 (at.%) alloy are discussed. The formation and evaluation of amorphous-nanocrystalline structures of the alloy were followed by XRD, SEM-EDX, TEM, DTA, and VSM techniques. After 50 h of milling Cr, Nb, and B were completely dissolved into the Fe lattice forming 82% of the amorphous phase of the alloy. A gradual dissolution of the alloying elements also increased the lattice parameters concurrently. The lattice parameters reached a maximum value of 2.908 Å after 20 h of milling and then leveled off to a value of 2.891 Å at the end of 50 h of milling. Based on the XRD data, crystallite size and lattice strain of the alloy were calculated as 3.2 nm and 3.34% respectively. TEM analyses revealed that the alloy particulates comprised needle-shaped nanoparticles of an average size of 21 nm. The room temperature magnetic hysteresis loops showed that the increased duration of milling decreased the saturation magnetization from 91 to 24 emu/g. This was mainly due to the upsurge on the amorphous phase content in the alloy as the milling progressed. The increase in amorphous phase content and the subsequent reduction of the saturation magnetization were due to the inter-diffusion of the non-ferromagnetic Cr and B atoms into the Fe lattice. Thermal studies revealed that around 350 °C the amorphous phase of the alloy began crystallizing. The magnetic saturation of the heat-treated alloy also increased with the growth in the crystalline phases. The 50 h milled sample annealed at 700 °C was found to have the highest magnetic anisotropy as observed from the temperature-dependent zero-field cooled and field cooled magnetization measurements. The high-pressure X-ray diffraction measurements revealed that the amorphous state of the alloy remained stable up to 11.3 MPa. It also revealed the structural similarities of the Fe 70 Cr 10 Nb 10 B 10 alloy with those of the Fe 70 M 10 B 20 (M = Nb and Cr) types. For all practical purposes, the microstructural stability under high compressive pressure represents the consolidation properties of the nanostructured magnetic materials since both pressure and temperature-induced phase transformations are the primary controlling factors for the specific magnetization properties of the alloy.

Effect of High Pressure on Microstructure of Crystallizing Amorphous Nd9Fe85B6 Alloy

Microstructure And Magnetic Properties Of Bulk Nanocomposite Magnets Prepared By Crystallizing Amorphous Nd3.6pr5.4fe80co3b7nb1 Under High Pressure

Microstructure and magnetic properties of bulk nanocomposite magnets prepared by crystallizing amorphous Nd<sub>3.6</sub>Pr<sub>5.4</sub>Fe<sub>80</sub>Co<sub>3</sub>B<sub>7</sub>Nb<sub>1</sub>under high pressure

Pressure Effects on Al89La6Ni5 Amorphous Alloy Crystallization

Effect of High Temperature-High Pressure Treatment on Microstructure and Mechanical Properties of Cu-Cr Alloy

Effect of high pressure treatment on Ni50Al30Fe20 intermetallic alloy

Effects of pressure on microstructure evolution of liquid Fe-S-Bi alloy during rapid solidification: A molecular dynamics study

Bulk Alpha-Fe/Nd2fe14b Nanocomposite Magnets Prepared by the Phase Transition of Amorphous Nd9fe81co3nb1b6 under High Pressure

Spinodal decomposition, ordering, and precipitation transformation in CoCrFeNiAl HEAs under GPa pressure

Pressure-Induced Amorphization and Recrystallization of Sni2

Effect of Cr on solidification structure and microhardness of Al-Ni alloy

First-principles Study of Ni-Al Intermetallic Compounds under Various Temperature and Pressure

Grain-Size and Alloying Effects on the Pressure-Induced Bcc-to-hcp Transition in Nanocrystalline Iron

Grain Size Effect of Bulk Nanocrystalline Pr0.5Nd0.5(Fe0.75Co0.1Cu0.01 Nb0.04Si0.05B0.05)1.93 Alloy Synthesized Under Ultrahigh Pressure

Microstructure evolution in high-pressure phase transformations of CrFeNi and CoCrFeMnNi alloys

Effect of carbon content and annealing on structure and hardness of CrFe2NiMnV0.25 high-entropy alloys processed by high-pressure torsion

Synthesis and characterization of amorphous-nanocrystalline Fe70Cr10Nb10B10 powders by mechanical alloying

Crystallization Process of Amorphous Fe86Zr7B6Cu1 Alloy under Hot Isothermal Pressing

Effect of pre-annealing on microstructures and soft magnetic properties of nanocrystalline Fe_(86)Zr_7B_6Cu_1 alloy

Effect of Pressure on the Structure of Ti75Al25 Alloy During Rapid-Quenching Process

Origin of pressure-induced crystallization of Ce75Al25 metallic glass.