Abstract:To meet the growing demand for lithium resources, it is ideal to develop a green and efficient approach for recovering lithium resources from discarded lithium-ion batteries. In this work, nanofiber membranes of 14-crown-4-ether polyimide (14C4PI) (M n = 33 kDa) with the crown ether loading of 1.38 mmol g −1 in the main chain were fabricated by electrospinning and the structure of the nanofiber membrane was regulated by tuning the electrospinning parameters. The selectivity adsorption of 14C4PI nanofiber membrane was investigated in the simulated extract of discarded lithium-ion batteries. The results showed that the 14C4PI-12 nanofiber membrane with a high specific surface area of 41.27 m 2 /g and a diameter of 122.7 nm was successfully prepared under the operating conditions (polymer concentration of 12 wt%, voltage of 30 kV, flow speed of 1 mL h −1 , tip-to-collector of 100 mm). The 14C4PI-12 nanofiber membrane displayed a high equilibrium adsorption capacity for Li + (Q m = 40.17 mg g −1 ). The adsorption of Li + onto the membrane was proven to be monolayer chemical adsorption confirmed by adsorption kinetics and isotherm models. The calculated equilibrium adsorption rate (EAR) was up to 70 % and the complex-ratio of crown ether in 14C4PI to Li + was 1.46:1, whose theoretical value is 1:1. Meanwhile, the selective separation factor of Li + to Na + , K + , Mn 2+ , Co 2+ , and Ni 2+ were up to 52.3, 54.97, 48.82, 41.05 and 35.04, respectively, which were much higher than that obtained from other selective adsorption method reported in literatures. The density functional theory (DFT) calculations confirm that the superior selectivity of 14C4PI to Li + is attributed to the higher Gibbs free energy change of 14C4PI-Li + complexation (−113.99 kcal mol −1 ). To sum up, this work provides an efficient method to fabricate crown ether functional polymer nanofiber membrane for recycling lithium resources.

Electrospun nanofiber membrane of 14-crown-4 polyimide by in situ grafting diamino crown ether for highly selective Li + adsorption and separation

Electrospun nanofiber membrane of dibenzo 14-crown-4-ether polyimide for efficient selective lithium recovery from discarded lithium-ion batteries

Remarkably High Li + Adsorptive Separation Polyamide Membrane by Improving the Crown Ether Concentration and Electron Density

Crown Ether Grafted Graphene Oxide/Chitosan/Polyvinyl Alcohol Nanofiber Membrane for Highly Selective Adsorption and Separation of Lithium Ion

Polyacrylonitrile/Crown Ether Composite Nanofibres With High Efficiency for Adsorbing Li(I): Experiments and Theoretical Calculations

Aza-crown ether-coupled polyamide nanofiltration membrane for efficient Li+/Mg2+ separation

High specific surface crown ether modified chitosan nanofiber membrane by low-temperature phase separation for efficient selective adsorption of lithium

Facile Design of a Crown Ether-Functionalized Polymeric Membrane for Highly Efficient Lithium and Magnesium Separation During Electrodialysis

Supported ionic liquid membrane contactor with crown ether functionalized polyimide membrane for high-efficient Li + /Mg 2+ selective separation

Advanced Lithium Extraction Membranes Derived from Tagged-Modification of Polyamide Networks

Fabrication of polyacrylonitrile-Li1.6Mn1.6O4 composite nanofiber flat-sheet membranes via electrospinning method as effective adsorbents for Li+ recovery from salt-lake brine

Polyamide nanofiltration membranes with rigid–flexible microstructures for high-efficiency Mg 2+ /Li + separation

Space‐Confined Synthesis of Thinner Ether‐Functionalized Nanofiltration Membranes with Coffee Ring Structure for Li+/Mg2+ Separation

Electrospun polyimide-based fiber membranes as polymer electrolytes for lithium-ion batteries

Highly-Efficient adsorptive separation of Cs+ from aqueous solutions by porous polyimide membrane containing Dibenzo-18-Crown-6

An ion sieve-tailored biomimetic porous nanofibrous as an efficient adsorbent for lithium extraction from brine

Nanofiltration membrane with modified nano-gradient structure and positive charge for Li separation from high Mg/Li ratio brine

Fabrication of positively charged nanofiltration membrane with uniform charge distribution by reversed interfacial polymerization for Mg2+/Li+ separation

Enhancing Mg 2+ /Li + separation performance of nanofiltration membranes through polyelectrolyte modulation and surface modification

Improving Mg 2+ /Li + separation performance of polyamide nanofiltration membrane by swelling-embedding-shrinking strategy

Crown-grafted loose nanofiltration membranes for the recovery of brine resources: insights from molecular dynamics simulations