Abstract:The hybrid carbon conductive nanoparticles to obtain polymer nanomaterials based on epoxy resin, poly(etherimide) (PEI), condensing polyesters (PET, PTT) and thermoplastic elastomers (PTT–block–PTMO) have been used. The influence of the addition of carbon nanotubes (singleand multi-walled), carbon nanofibers, graphene derivatives, and mixtures of both, on the electrical conductivity properties as well as the possibility to obtain the so called synergic effect of the enhancement of electrical conductivity. The aim of the research was obtaining polymer hybrid nanocomposites containing nanoparticles differ in shape (1D and 2D), which due to the high aspect ratio and a specific high surface area show a strong tendency to agglomeration. Resulting in the process of chemical synthesis of the polymer matrix (in situ) polymer hybrid nanocomposites were characterized by a high degree of uniformity of the structure and improved physical properties (much lower percolation thresholds in relation to composites based for example on epoxy resin or poly(etherimide)). Efficiency of in situ polymerization in obtaining hybrid nanomaterials has been evaluated through synthesis of thermoplastic polyesters (PET and PTT) and with thermoplastic elastomers (PTT–block–PTMO). The conditions for preparing 1D and 2D nanoparticle dispersions in a liquid substrate has been established using ultrasonic vibration alternately with a mechanical stirrer and conducting the synthesis depending on the type of polymer matrix. It was also shown that the addition of single-walled carbon nanotubes and graphene nanoplatelets with a concentration of not higher than 0.6 wt % to the condensation polymers allows obtaining lightweight, electrically conductive composite materials with improved thermal stability and improved mechanical properties. Additionally, for nanocomposites based on PTT–block–PTMO the positive hybrid effect has been observed, for both, improvement in mechanical properties and electrical conductivity. It was observed that the graphene nanoplatelets are fairly evenly distributed throughout the polymer and specifically linked to carbon nanotubes. This connection plays an essential role in the creation of the conduction paths in the hybrid nanocomposite. The observed synergistic hybrid effect is the result of the phenomena occurring in the polymer in the presence of carbon nanoparticles and the effects on the verge of a filler–filler and filler–polymer.

Synergic effect in the enhancement of the electrical conductivity of polymer hybrid nanocomposites containing 1 D and 2 D carbon nanofillers

Effect of hybrid nanofillers on thermal conductivity of composite phase change materials

Striking multiple synergies created by combining reduced graphene oxides and carbon nanotubes for polymer nanocomposites

Synergistic Effect of Cu2+-coordinated Carbon Nanotube/graphene Network on the Electrical and Mechanical Properties of Polymer Nanocomposites

Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy

Synergistic Effects of Hybrid Carbonaceous Fillers of Carbon Fibers and Reduced Graphene Oxides on Enhanced Heat-Dissipation Capability of Polymer Composites

Dielectric, mechanical and electro-stimulus response properties studies of polyurethane dielectric elastomer modified by carbon nanotube-graphene nanosheet hybrid fillers

Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Boosting electrical and piezoresistive properties of polymer nanocomposites via hybrid carbon fillers: A review

Enhancing the electrical conductivity of polymer composites

Testing, Experimental Design, and Numerical Analysis of Nanomechanical Properties in Epoxy Hybrid Systems Reinforced with Carbon Nanotubes and Graphene Nanoparticles

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

Synergically enhanced viscoelastic behavior of binary nanocarbon based polyurethane hybrid nanocomposite foams

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

The nonlinear synergistic enhancement electric conductive effect in polymer-matrix composites containing hybrid fillers of carbon nanotubes and graphene nanoplatelets

Impact of hybrid nanofillers on the structure and property of polypropylene/polystyrene composites based on elongation flow

Synergistic Effects of Hybrid Graphitic Nanofillers on Simultaneously Enhanced Wear and Mechanical Properties of Polymer Nanocomposites

The effect of boron nitride on electrical conductivity of nanocarbon-polymer composites

Synergistic Toughening and Strengthening of an Epoxy Resin Modified by the Simultaneous Use of Two Different Modifiers

Synergetic effects of carbon nanotubes and carbon fibers on electrical and self-heating properties of high-density polyethylene composites

Analytical modeling and experimentally optimizing synergistic effect on thermal conductivity enhancement of polyurethane nanocomposites with hybrid carbon nanofillers