Abstract:The hybrid carbon conductive nanoparticles to obtain polymer nanomaterials based on epoxy resin, poly(etherimide) (PEI), condensing polyesters (PET, PTT) and thermoplastic elastomers (PTT–block–PTMO) have been used. The influence of the addition of carbon nanotubes (singleand multi-walled), carbon nanofibers, graphene derivatives, and mixtures of both, on the electrical conductivity properties as well as the possibility to obtain the so called synergic effect of the enhancement of electrical conductivity. The aim of the research was obtaining polymer hybrid nanocomposites containing nanoparticles differ in shape (1D and 2D), which due to the high aspect ratio and a specific high surface area show a strong tendency to agglomeration. Resulting in the process of chemical synthesis of the polymer matrix (in situ) polymer hybrid nanocomposites were characterized by a high degree of uniformity of the structure and improved physical properties (much lower percolation thresholds in relation to composites based for example on epoxy resin or poly(etherimide)). Efficiency of in situ polymerization in obtaining hybrid nanomaterials has been evaluated through synthesis of thermoplastic polyesters (PET and PTT) and with thermoplastic elastomers (PTT–block–PTMO). The conditions for preparing 1D and 2D nanoparticle dispersions in a liquid substrate has been established using ultrasonic vibration alternately with a mechanical stirrer and conducting the synthesis depending on the type of polymer matrix. It was also shown that the addition of single-walled carbon nanotubes and graphene nanoplatelets with a concentration of not higher than 0.6 wt % to the condensation polymers allows obtaining lightweight, electrically conductive composite materials with improved thermal stability and improved mechanical properties. Additionally, for nanocomposites based on PTT–block–PTMO the positive hybrid effect has been observed, for both, improvement in mechanical properties and electrical conductivity. It was observed that the graphene nanoplatelets are fairly evenly distributed throughout the polymer and specifically linked to carbon nanotubes. This connection plays an essential role in the creation of the conduction paths in the hybrid nanocomposite. The observed synergistic hybrid effect is the result of the phenomena occurring in the polymer in the presence of carbon nanoparticles and the effects on the verge of a filler–filler and filler–polymer.

Striking multiple synergies created by combining reduced graphene oxides and carbon nanotubes for polymer nanocomposites

Synergistic Effect of Cu2+-coordinated Carbon Nanotube/graphene Network on the Electrical and Mechanical Properties of Polymer Nanocomposites

Largely Enhanced Thermal and Mechanical Properties of Polymer Nanocomposites Via Incorporating C60@graphene Nanocarbon Hybrid

Investigation on the interfacial mechanical properties of hybrid graphene-carbon nanotube/polymer nanocomposites

Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy

Synergic effect in the enhancement of the electrical conductivity of polymer hybrid nanocomposites containing 1 D and 2 D carbon nanofillers

Synergically enhanced viscoelastic behavior of binary nanocarbon based polyurethane hybrid nanocomposite foams

The effect of the addition of carbon nanotube fluids to a polymeric matrix to produce simultaneous reinforcement and plasticization

Synergic enhancement of thermal properties of polymer composites by graphene foam and carbon black

Towards Balanced Mechanical and Electrical Properties of Thermoplastic Vulcanizates Composites Via Unique Synergistic Effects of Single-Walled Carbon Nanotubes and Graphene

High-strength composite fibers: realizing true potential of carbon nanotubes in polymer matrix through continuous reticulate architecture and molecular level couplings.

Covalent polymer functionalization of graphene nanosheets and mechanical properties of composites

Free-Standing Graphene Oxide and Carbon Nanotube Hybrid Papers with Enhanced Electrical and Mechanical Performance and Their Synergy in Polymer Laminates

Preparation of flexible, highly conductive polymer composite films based on double percolation structures and synergistic dispersion effect

Processable Dispersions of Graphitic Carbon Nitride Based Nanohybrids and Application in Polymer Nanocomposites

Effect of reduced graphene oxide, multi-walled carbon nanotubes and their mixtures on the electrical conductivity and mechanical properties of a polymer composite with a segregated structure

Simultaneous Enhancement on Thermal and Mechanical Properties of Polypropylene Composites Filled with Graphite Platelets and Graphene Sheets

Harnessing nanostructures and fiber architecture: A synergistic leap in shape memory polymer composites

Aligned Carbon Nanotube/polymer Composite Fibers with Improved Mechanical Strength and Electrical Conductivity

Preparation of flame retardant and conductive epoxy resin composites by incorporating functionalized multi‐walled carbon nanotubes and graphite sheets

Enhancing polypropylene composites: synergistic effects of graphene nanoplatelets and glass fibers on mechanical and thermal properties