Abstract:The hybrid carbon conductive nanoparticles to obtain polymer nanomaterials based on epoxy resin, poly(etherimide) (PEI), condensing polyesters (PET, PTT) and thermoplastic elastomers (PTT–block–PTMO) have been used. The influence of the addition of carbon nanotubes (singleand multi-walled), carbon nanofibers, graphene derivatives, and mixtures of both, on the electrical conductivity properties as well as the possibility to obtain the so called synergic effect of the enhancement of electrical conductivity. The aim of the research was obtaining polymer hybrid nanocomposites containing nanoparticles differ in shape (1D and 2D), which due to the high aspect ratio and a specific high surface area show a strong tendency to agglomeration. Resulting in the process of chemical synthesis of the polymer matrix (in situ) polymer hybrid nanocomposites were characterized by a high degree of uniformity of the structure and improved physical properties (much lower percolation thresholds in relation to composites based for example on epoxy resin or poly(etherimide)). Efficiency of in situ polymerization in obtaining hybrid nanomaterials has been evaluated through synthesis of thermoplastic polyesters (PET and PTT) and with thermoplastic elastomers (PTT–block–PTMO). The conditions for preparing 1D and 2D nanoparticle dispersions in a liquid substrate has been established using ultrasonic vibration alternately with a mechanical stirrer and conducting the synthesis depending on the type of polymer matrix. It was also shown that the addition of single-walled carbon nanotubes and graphene nanoplatelets with a concentration of not higher than 0.6 wt % to the condensation polymers allows obtaining lightweight, electrically conductive composite materials with improved thermal stability and improved mechanical properties. Additionally, for nanocomposites based on PTT–block–PTMO the positive hybrid effect has been observed, for both, improvement in mechanical properties and electrical conductivity. It was observed that the graphene nanoplatelets are fairly evenly distributed throughout the polymer and specifically linked to carbon nanotubes. This connection plays an essential role in the creation of the conduction paths in the hybrid nanocomposite. The observed synergistic hybrid effect is the result of the phenomena occurring in the polymer in the presence of carbon nanoparticles and the effects on the verge of a filler–filler and filler–polymer.

Synergistic Effect of Cu2+-coordinated Carbon Nanotube/graphene Network on the Electrical and Mechanical Properties of Polymer Nanocomposites

Striking multiple synergies created by combining reduced graphene oxides and carbon nanotubes for polymer nanocomposites

Synergistic Effect of Carbon Nanotube and Graphene Nanoplates on the Mechanical, Electrical and Electromagnetic Interference Shielding Properties of Polymer Composites and Polymer Composite Foams

Synergistic Effect in Conductive Networks Constructed with Carbon Nanofillers in Different Dimensions

Preparation of Polymer Nanocomposites with Enhanced Mechanical Properties Using Hybrid of Graphene and Partially Wrapped Multi-Wall Carbon Nanotube As Nanofiller

Synergistic Effect of MWCNTs and Graphite Powder on the Properties of Polymer Nanocomposites

Synergistic Effect of Carbon Nanotube and Graphene on Multifunctional Properties of Their Polymer Composites

Synergistic effect of Mn 2+ with unzipped carbon nanotubes on enhancement of mechanical properties of polyamide 66

Improved mechanical-physical performances of copper composites with reduced graphene oxide and carbonized polymer dots as multi-scale synergetic reinforcements

Implication of Multi-Walled Carbon Nanotubes on Polymer/graphene Composites

Synergistic Strengthening Effect of Nanocrystalline Copper Reinforced with Carbon Nanotubes

Synergic effect in the enhancement of the electrical conductivity of polymer hybrid nanocomposites containing 1 D and 2 D carbon nanofillers

Synergically enhanced viscoelastic behavior of binary nanocarbon based polyurethane hybrid nanocomposite foams

Tadpole-like Bottlebrush Polymer-Modified Multiwalled Carbon Nanotubes: A Strategy for Interface-Strengthened Polymer Nanocomposites with Exceptional Performance

Synergistic Optimization of Properties in Carbon Nanotubes Reinforced Cu Matrix Composites Prepared by Co-Deposition

The Effect of Adding Graphene Oxide into CNT/polymer System on the CNT Dispersion and Mechanical Properties of the Hybrid Nanocomposites

Synergistic effects of CNTs/SiO2 composite fillers on mechanical properties of cement composites

Attaining the strength-plasticity-electricity balance of carbon nanotube/Cu composites through combining the intragranular carbonized polymer dots distribution

The Synergistic Improvement in Mechanical Strength and Toughness Obtained in Epoxy-Based Composites Incorporating with Carbon Nanotubes-Polymer Hybrid Construction

Electrical Conducting Behavior of Hybrid Nanocomposites Containing Carbon Nanotubes and Carbon Black

Largely Enhanced Thermal and Mechanical Properties of Polymer Nanocomposites Via Incorporating C60@graphene Nanocarbon Hybrid