Abstract:Carbon nanotube/continuous carbon fiber reinforced poly(ethylene terephthalate) (CNT/CCF/PET) composites are prepared by melt impregnating. The effects of CF and CNT content on the mechanical properties, melt and crystallization behaviors, and submicroscopic morphology of CNT/CCF/PET composites are studied. The tensile test results show that the increase of CF and the addition of appropriate amount of CNT improved the tensile strength and tensile modulus of the composites. When the content of CNT is 1.0 wt% and the content of CF is 56 wt%, the properties of the composites are the best, with tensile strength of 1728.7 MPa and tensile modulus of 25.1 GPa, which is much higher than that of traditional resin matrix composites. The results of dynamic mechanical analysis (DMA) show that the storage modulus of the composites increased with the increase of CF and CNT content. In particular, the addition of CNT greatly reduced the loss modulus of the composites. Morphological analysis show that the addition of CNT improved the fiber–matrix interface of the composite, which changes from fiber pull-out and fracture failure to fiber matrix fracture failure, and the fiber matrix interface is firmly bonded. In addition, there are polymer coated CNT protrusions on the surface of the fiber was observed. The results of differential scanning calorimetry (DSC) show that the melting temperature and crystallization temperature of the composites increased with the increase of CF content. The addition of CNT had little effect on the melting temperature of the composites, but it further improved the crystallization temperature of the composites. The effect of CNT content on the crystallization kinetics of the composites is studied. The non-isothermal crystallization kinetics of the composites is described by Jeziorny's improved Avrami equation. The results show that CNT has a great influence on the crystallization type of the composites. As a nucleating agent, CNT has obvious heterogeneous nucleation effect in the composites, which improves the crystallization rate of PET.

The effect of the addition of carbon nanotube fluids to a polymeric matrix to produce simultaneous reinforcement and plasticization

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Mechanical properties of carbon nanotube/carbon fiber reinforced thermoplastic polymer composite

Influence of a Liquid-Like MWCNT Reinforcement on Interfacial and Mechanical Properties of Carbon Fiber Filament Winding Composites

Wettability of Carbon Nanotube-Grafted Carbon Fibers and Their Interfacial Properties in Polypropylene Thermoplastic Composite

Epoxy/ionic Liquid-Like MWCNTs Composites with Improved Processability and Mechanical Properties

Effects of carbon nanotube length on interfacial properties of carbon fiber reinforced thermoplastic composites

Striking multiple synergies created by combining reduced graphene oxides and carbon nanotubes for polymer nanocomposites

Study on Poly(methyl Methacrylate)/carbon Nanotube Composites

Atomic Scale Investigation on the Structural and Mechanical Properties of Carbon Nanotubes Reinforced Polylactic Acid Composites

Synergistic Effect of Cu2+-coordinated Carbon Nanotube/graphene Network on the Electrical and Mechanical Properties of Polymer Nanocomposites

Study on Mechanical Behaviors of Carbon Nanotube/Polyvinyl Alcohol Composite Fibers by Coarse-Grained Molecular Dynamics Simulations

Mechanical Properties, Melting and Crystallization Behaviors, and Morphology of Carbon Nanotubes/Continuous Carbon Fiber Reinforced Polyethylene Terephthalate Composites

A Conductive Carbon Nanotube-Polymer Composite Based on A Co-Continuous Blend

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

The Effect of Carbon Nanotube Plus Graphene on the Shape Memory Behavior and Tensile Properties of A Liquid Crystalline Polyester

Superior Reinforcement in Polyamide 1010/multiwalled Carbon Nanotube Composites Realized by High-Rate Drawing and Incorporation of Compatibilizer

Construction of polydopamine and carbon nanotube on carbon fiber surfaces to improve the mechanical properties of CF/PLA composite

Synergistic Effect of Carbon Nanotube and Graphene on Multifunctional Properties of Their Polymer Composites

Interfacially Reinforced Methylphenylsilicone Resin Composites by Chemically Grafting Multiwall Carbon Nanotubes Onto Carbon Fibers

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites