Abstract:The hybrid carbon conductive nanoparticles to obtain polymer nanomaterials based on epoxy resin, poly(etherimide) (PEI), condensing polyesters (PET, PTT) and thermoplastic elastomers (PTT–block–PTMO) have been used. The influence of the addition of carbon nanotubes (singleand multi-walled), carbon nanofibers, graphene derivatives, and mixtures of both, on the electrical conductivity properties as well as the possibility to obtain the so called synergic effect of the enhancement of electrical conductivity. The aim of the research was obtaining polymer hybrid nanocomposites containing nanoparticles differ in shape (1D and 2D), which due to the high aspect ratio and a specific high surface area show a strong tendency to agglomeration. Resulting in the process of chemical synthesis of the polymer matrix (in situ) polymer hybrid nanocomposites were characterized by a high degree of uniformity of the structure and improved physical properties (much lower percolation thresholds in relation to composites based for example on epoxy resin or poly(etherimide)). Efficiency of in situ polymerization in obtaining hybrid nanomaterials has been evaluated through synthesis of thermoplastic polyesters (PET and PTT) and with thermoplastic elastomers (PTT–block–PTMO). The conditions for preparing 1D and 2D nanoparticle dispersions in a liquid substrate has been established using ultrasonic vibration alternately with a mechanical stirrer and conducting the synthesis depending on the type of polymer matrix. It was also shown that the addition of single-walled carbon nanotubes and graphene nanoplatelets with a concentration of not higher than 0.6 wt % to the condensation polymers allows obtaining lightweight, electrically conductive composite materials with improved thermal stability and improved mechanical properties. Additionally, for nanocomposites based on PTT–block–PTMO the positive hybrid effect has been observed, for both, improvement in mechanical properties and electrical conductivity. It was observed that the graphene nanoplatelets are fairly evenly distributed throughout the polymer and specifically linked to carbon nanotubes. This connection plays an essential role in the creation of the conduction paths in the hybrid nanocomposite. The observed synergistic hybrid effect is the result of the phenomena occurring in the polymer in the presence of carbon nanoparticles and the effects on the verge of a filler–filler and filler–polymer.

Impact of hybrid nanofillers on the structure and property of polypropylene/polystyrene composites based on elongation flow

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Effect of hybrid nanofillers on thermal conductivity of composite phase change materials

Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Influence of graphene nanoplatelets (GnPs) and titanium dioxide (TiO2) hybrid fillers on the mechanical, thermal, and morphological performance of polypropylene (PP) based hybrid composites

High impact strength of polypropylene composites with complex titanate whiskers/multiwalled carbon nanotubes

Melt extrudate swell behavior of multi‐walled carbon nanotubes filled‐polypropylene composites

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Filled by Styrene‐butadiene Rubber and Silica Nanoparticles

High density polyethylene hybrid nanocomposites reinforced with carbon nanofiber and nanoclay

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

The Structure and Physical Properties of Polypropylene and Thermoplastic Olefin Nanocomposites Containing Nanosilica

A comparative study on the thermomechanical properties of polymeric nanocomposites incorporating single, mixed, and hybrid nanofillers

Microstructure-mechanical property relationships of polymer nanocomposite reinforced with lyophilized montmorillonite/carbon nanotubes hybrid particles

Network structural hardening of polypropylene matrix using hybrid of 0D, 1D and 2D carbon-ceramic nanoparticles with enhanced mechanical and thermomechanical properties

Synergistic Effect of Cu2+-coordinated Carbon Nanotube/graphene Network on the Electrical and Mechanical Properties of Polymer Nanocomposites

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

Synergic effect in the enhancement of the electrical conductivity of polymer hybrid nanocomposites containing 1 D and 2 D carbon nanofillers

Dielectric, mechanical and electro-stimulus response properties studies of polyurethane dielectric elastomer modified by carbon nanotube-graphene nanosheet hybrid fillers