Abstract:Adding conductive fillers to an insulating polymer matrix produces composites with unique properties. Varying amounts of carbon black (0.33, 0.67, and 1 wt%) and graphene nanoplatelets (5, 10, 15, and 20 wt%) were added to epoxy. In addition, a few carbon black/graphene nanoplatelet/epoxy formulations were also fabricated. The conductivity and tensile properties were determined and analyzed. The single filler composites containing 5 and 10 wt% graphene nanoplatelet and 0.33 wt% carbon black could be used for electrically insulating applications. Composites containing 15 and 20 wt% graphene nanoplatelet could be used for static dissipative applications. The following composites could be used for semi-conductive applications: 0.67 wt% carbon black/epoxy, 1 wt% carbon black/epoxy, 0.33 wt% carbon black/5 wt% graphene nanoplatelet/epoxy, and 0.33 wt% carbon black/10 wt% graphene nanoplatelet/epoxy. At the 95% confidence level, the combination of 0.33 wt% carbon black with 5 wt% graphene nanoplatelet caused the composite electrical resistivity (1/electrical conductivity) to significantly decrease from ∼10 15 ohm-cm to ∼10 4 ohm-cm. It is likely that the highly branched, high surface area carbon black is forming an electrically conductive network with graphene nanoplatelets. Concerning single filler composites, adding ≤1 wt% carbon black did not significantly lower the composite tensile strain; however, adding graphene nanoplatelet did decrease tensile strain and increase modulus. One possible application for the 10 wt% graphene nanoplatelet/epoxy composite is in Polymer Core Composite Conductors for power transmission lines, which need to be electrically insulating, have improved thermal conductivity (increased from 0.2 to 0.3 W/m-K), increased tensile modulus (increased from 2.7 to 3.3 GPa), and good tensile strength (70 MPa) and strain (3.3%).

Enhancing the electrical conductivity of polymer composites

Effect of Nonconductive Inorganic Fillers on Electrical Properties of Epoxy/Graphene Nanoplatelets Composites

Largely enhanced thermal and electrical conductivity via constructing double percolated filler network in polypropylene/expanded graphite – Multi-wall carbon nanotubes ternary composites

Largely Improved Thermal Conductivity of HDPE/expanded Graphite/carbon Nanotubes Ternary Composites Via Filler Network-Network Synergy

Facile green path to interconnected nano-graphite networks to overtake graphene as conductive fillers

Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy

Significant Enhancement of Thermal Conductivity in Polymer Composite Via Constructing Macroscopic Segregated Filler Networks.

Study on Electrical, Morphology and Rheological Properties of PP/Expanded Graphite/Carbon Nanotubes Composites

A high-performance thermally conductive and electrically insulating silver@siloxane/graphene/epoxy composites at low filler content: Fabrication, mechanism study of insulation and thermal conductivity enhancement

Preparation and electrically conductive behavior of multiphase composites of carbon nanotube/polyethylene/polystyrene

Development of the Conductive Polymer Matrix Composite with Low Concentration of the Conductive Filler

Dielectric properties of the polymer based composites filled by the different conductivities fillers

Polyethylene/grafted Polyethylene/graphite Nanocomposites: Preparation, Structure, and Electrical Properties

Tensile and conductivity properties of epoxy composites containing carbon black and graphene nanoplatelets

The nonlinear synergistic enhancement electric conductive effect in polymer-matrix composites containing hybrid fillers of carbon nanotubes and graphene nanoplatelets

Synergistic Effect in Conductive Networks Constructed with Carbon Nanofillers in Different Dimensions

Effect of the Filler Structure of Carbon Nanomaterials on the Electrical, Thermal, and Rheological Properties of Epoxy Composites

Ultralow electrical percolation in melt-compounded polymer composites based on chemically expanded graphite

Nonlinear Conductive Behaviors of Multilayer Graphene Nanosheets/Epoxy Composites below the Percolation Threshold

Increasing the electrical conductivity of carbon nanotube/polymer composites by using weak nanotube–polymer interactions

The Effect of Electric Field, Annealing Temperature and Filler Loading on the Percolation Threshold of Polystyrene Containing Carbon Nanotubes and Graphene Nanosheets