Abstract:Most large experiments for high energy particle physics are time measurement related, which requires a network supporting the broadcast communication in order to distribute the central clock to all endpoints. In addition to conventional solutions using a dedicated network just for time synchronization, several groups have proposed to embed the clock distribution network into the data stream network. Using only a single bidirectional fiber link for all network abilities, some special demands for these experiments, for example, limited space for hardware and long distance connection, can be satisfied. As the time resolution of detectors is constant increasing, the performance requirement for time synchronization based on this unified network is challenged. In this paper, we propose to use the state-of-art techniques on field programmable gate arrays (FPGA) and optical circulator based fiber connections to implement the unified network. By constructing a prototype system with three levels of hierarchical structure, the time synchronization performance is experimentally measured. Benefitting from the single wavelength fiber connection, high precision time-to-digital convertors (TDC), and phase interpolator (PI) components in FPGA SerDes transceivers, the clock offset of the distribution can be precisely measured and automatically compensated. Through multiple times of power-on and reset operation test, the clock synchronization accuracy over 5 km fiber connection is measured less than 40 ps. By employing the jitter cleaner devices in clock recovered endpoints, the recovered clock in different levels have independent jitter less than 4 ps. In addition, the achieved high performance is also proved to be insensitive to operation temperature and the connection distance. The test results show that the proposed implementation is a straight-forward and practical method with the high performance that can meet the requirements of most current large-scale experiments.

Reference Clock Assessment Techniques for PCIe Gen5 and Beyond

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

Design techniques for reference clock jitter optimization for high speed PHYs

Bursty Jitter In High-Speed I/O Due To Power-State Transition And Its Impact On Signal Integrity

Design and Analysis for High-Speed and High-Precision Clock Board

Logic Design for On-Chip Test Clock Generation - Implementation Details and Impact on Delay Test Quality

Design and Implementation of PCIe Physical Layer Elastic-buffer

Theoretical Modeling and Simulation of Phase-Locked Loop (PLL) for Clock Data Recovery (CDR)

Power Integrity analysis and solution for PCIE-Gen5/6 Phy

A simulation methodology for establishing IR-drop-induced clock jitter for high precision timing ASICs

A Loss of Reference Clock Detect Circuit

A High-Precision 2.5-Ps RMS Time Synchronization for Multiple High-Speed Transceivers in FPGA

A Uniform Bandwidth PLL Using a Continuously Tunable Single-Input Dual-Path LC VCO for 5gb/s PCI Express Gen2 Application

Performance Analysis of PTP Components for IEC 61850 Process Bus Applications

High-precision Time Interval Measurement Instrument Based on PCI Bus

A Power Scalable 2-10 Gb/s PI-based Clock Data Recovery for Multilane Applications.

Performance Investigation on a Clock Distribution and Synchronization Scheme over DWDM Optical Links

An Improved Clock Cycle Measurement Method for High-Speed Serial Signal with Duty-Cycle-Distortion Jitter

Performance Evaluation Of A Clock Synchronization Over Fiber Data Links For Large Experiments

How Does Crosstalk Influence the Jitter of a Clock Signal?

Fault-Resilient PCIe Bus with Real-time Error Detection and Correction