Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Concurrent Chip-Package Design for 10ghz Global Clock Distribution Network

Concurrent Chip Package Design for Global Clock Distribution Network Using Standing Wave Approach

Input Signal Distribution Using Coupled Lambda/2 Standing-Wave Oscillators For Coherent Power Combining

Case Study of Interconnect Analysis for Standing Wave Oscillator Design

Broadband Linearity Enhancement Method for a 1.3 GHz-2.5 GHz Digitally-Assisted Oscillator in a 55-Nm CMOS Technology

A 2.4 mW 2.5 GHz multi-phase clock generator with duty cycle imbalance correction in 0.13 µm CMOS

2.5 Mw 2.73 GHz Non-Overlapping Multi-Phase Clock Generator with Duty-Cycle Correction in 0.13 Μm CMOS

Modeling, Optimization and Control of Rotary Traveling-Wave Oscillator

A 40 Ghz 65 Nm Cmos Phase-Locked Loop with Optimized Shunt-Peaked Buffer

Design of bufferless resonant clock distribution network with low power and Low skew

Hierarchical Design of a Low Power Standing Wave Oscillator Based Clock Distribution Network

Hierarchical Distribution Network for Low Skew and High Variation-Tolerant Bufferless Resonant Clocking

Bufferless resonant clocking with low skew and high variation-tolerant

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

Synchronous Chip-to-Chip Communication with a Multi-Chip Resonator Clock Distribution Network

Statistical clock skew modeling and analysis for resonant clock distribution networks

Femtosecond-precision electronic clock distribution in CMOS chips by injecting frequency comb-extracted photocurrent pulses

A Multiphase Clock Generation Based On Dll For Source Synchronous Receiver In 65nm Cmos Technology

Standing Wave Oscillator Based Clock Distribution.

The Conical-Fishbone Clock Tree: A Clock-Distribution Network for a Heterogeneous Chip Multiprocessor AI Chiplet

Novel FPGA clock network with low latency and skew (abstract only).