Abstract:High-strength titanium alloys provide high-temperature resistance and excellent corrosion resistance and are widely used in the defense, automobile, and aerospace industries. Clinching is a cold forming joint method that achieves the active connection of titanium alloys. However, fretting fatigue damage can occur on the contact surface if the joint is subjected to a cyclic fatigue load; this causes wear, accelerates the initiation and expansion of fatigue cracks, and ultimately affects reliability and service life. A fretting fatigue damage model of a clinched joint was established in this study to predict damage rates and failure patterns. In addition, the static strength and fatigue properties of single-lap and cross-lap titanium alloy clinched joints were experimentally tested, and macroscopic and microscopic failure fracture analyses were conducted using an electron scanning microscope and an energy spectrometer. The results demonstrated that the static strength and fatigue performance of titanium alloy clinched joints under a shear load were significantly better than under a peeling load. The fretting fatigue damage model of the clinched joint showed that surface wear and crack propagation occurred in two regions of wear, and the main cause of joint failure was crack propagation: in the sheet overlap area under a shear load and in the clinched neck under a peeling load. The macroscopic and microscopic fatigue observation results were consistent with damage patterns predicted by the fretting fatigue damage model: fretting fatigue damage, including fatigue surface wear and fatigue crack initiation, occurred in the clinched neck and the sheet overlap region. In summary, crack initiation and expansion were the main causes of fatigue failure in titanium alloy clinched joints.

Fretting Fatigue Damage of Titanium Alloy Clinched Structure

Effects of Tensile/compressive Overloads on Fatigue Crack Growth Behavior of an Extra-Low-interstitial Titanium Alloy

Microstructural evolution and oxidation in α/β titanium alloy under fretting fatigue loading

Microstructure and pore sensitivities in very high cycle fatigue behaviors of titanium alloy welded joints under stress ratios

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Phase Interface-Induced Dwell Fatigue Cracks in Titanium Alloy with Lamellar Microstructure

Subsurface deformation mechanism and the interplay relationship between strength-ductility and fretting wear resistance during fretting of a high-strength titanium alloy

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Fatigue failure behaviour of bolted joining of carbon fibre reinforced polymers to titanium alloy

Initiation and propagation mechanism of fatigue crack in ultra-thick titanium alloy vacuum electron beam welding joint

Fretting fatigue crack initiation and propagation behaviours of Ti6Al4V alloy coated by functionally graded material

Contact damage failure analyses of fretting wear behavior of the metal stem titanium alloy-bone cement interface

Prediction of ductile cracking in the titanium alloy forging process

Dependence of fretting wear on the microstructure characteristics and impact on the subsurface stability of a metastable β titanium alloy

Stress-sensitive fatigue crack initiation mechanisms of coated titanium alloy

A Study on Fatigue Crack Closure Associated with the Growth of Long Crack in a New Titanium Alloy

Investigating dwell fatigue crack growth in welded titanium alloy structures

Slip dominated planar anisotropy of low cycle fatigue behavior of commercially pure titanium

High cycle fatigue behavior of titanium microalloyed high-strength beam steels

Titanium Alloy Materials with Very High Cycle Fatigue: A Review

Prediction of Fatigue Crack Growth Retardation Using a Cyclic Cohesive Zone Model