Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Rubber tracks and tyres: a detailed insight into force analysis during obstacle negotiation

Tire cornering simulation using finite element analysis

Finding Optimum Ackermann Geometry for a Car Undergoing Steady State Cornering Using Tire Data

An Integrated Approach for Friction and Wear Simulation of Tire Tread Rubber. Part I: Friction Test, Characterization, and Modeling

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Modeling of Tire Rolling Contact Response by REF Model

Analysis of Tire Contact Parameters Using Visual Processing

Research on simplified tire finite element modeling and simulation method

Asymmetry analysis of rolling contact for the heavy load radial tyre

System for measuring the coordinates of tire surfaces in transient conditions when rolling over obstacles: description of the system and performance analysis

Numerical analysis of the dynamic interaction between a non-pneumatic mechanical elastic wheel and soil containing an obstacle

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Study on intelligent tyre force estimation algorithm based on strain analysis

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

Finite Element Analysis for Tread Wear of Radial Tire

Isogeometric Analysis for Accurate Modeling of Rolling Tires

Tyre wear model: A fusion of rubber viscoelasticity, road roughness, and thermodynamic state

Review of Research on Tire–Pavement Contact Behavior

Study on the influence of cornering characteristics of complex tread tires on rolling resistance based on finite element method

Tyre rolling kinematics and prediction of tyre forces and moments: Part II-simulation and experiment