Abstract:This paper focuses on the modeling and analysis of a four-groove passenger car tire, size 235/55R19, using finite element analysis. The Mooney–Rivlin material model is employed to define the hyperelastic behavior of the tire rubber compounds for all solid elements. The tire rim is modeled as a rigid body using aluminum alloy material, and the beads are modeled as beam elements using steel material. The tire model is validated in both static and dynamic domains through several simulations and is compared to published measured data. The tire is validated using footprint and vertical stiffness tests in the static domain. In the static footprint test, a steady-state vertical load is applied, and the tire–road contact area is computed. In the vertical stiffness test, a ramp vertical load is applied, and the tire’s vertical displacement is measured to calculate the tire’s vertical stiffness. In the dynamic domain, the tire is validated using drum-cleat and cornering tests. In the drum-cleat test, a drum with a 2.5 m diameter and a cleat with a 15 mm radius is used to excite the tire structure and obtain the frequency of the vertical and longitudinal first modes of vibration, that is, by applying the fast Fourier transformation (FFT) of the vertical and longitudinal reaction forces at the tire center. In addition to this test, the tire model is pre-steered on a flat surface with a two-degree slip angle and subjected to a steady state linear speed of 10 km/h to predict the cornering force and compute the cornering stiffness. In addition, the effect of tire longitudinal speed on the rolling resistance coefficient is then predicted at zero slip angle using the ISO 28580 rolling resistance test. The findings of this research work provide insights into passenger car tire–road interaction analysis and will be further used to perform tire rubber compound material model sensitivity analysis.

Finding Optimum Ackermann Geometry for a Car Undergoing Steady State Cornering Using Tire Data

Optimization and Virtual Test of Steering Trapezoid of Formula Racing Car based on Particular Race Track

Research on Four‐wheel Independent Steering Intelligent Control Strategy Based on Minimum Load

Study on the Match of Front Wheel Caster Angle and Stability of High-speed Cornering

Research on Dynamics Steering Characteristics of a FSAE Racing Car on Bend Routes

Tire cornering simulation using finite element analysis

Kingpin Inclination Optimization Design of Formula Racing Car Based on Handiness and Returnability

Minimum time cornering: the effect of road surface and car transmission layout

A Traction Control Strategy Based On Optimal Slip Ratio For The In-Wheel Motor Electric Vehicle While Steering

Predicting steady-state cornering characteristics of automobiles by using automobile mechanical parameters

An Advancement in Truck-Tire–Road Interaction Using the Finite Element Analysis

Finite element analysis for tire cornering characteristics with tread pattern effects

Optimal allocation of tire force based on vehicle stability

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Experimental Study of Cornering Properties of Radial Tires on a Dry Pavement

A Study of Cornering Braking Control Strategy Based on Road Identification

A Research on the Steering Moment of a Light-duty High-mobility Off-road Vehicle

An Estimation Method of Tire-road Friction Coefficient Based on Tire Cornering Characteristics

THEORETICAL MODEL OF STEADY STATE TIRE CORNERING PROPERTIES WITH THE COMPLEX DEFORMATION OF CARCASS UNDER CONSIDERATION

A new formulation of the understeer gradient and stability margin to analyse vehicle steady-state cornering behaviour

Prediction Of Tire Cornering Behavior With An Enhanced Friction Model