Abstract:Quasi-solid state electrolyte is one of the promising options for next generation batteries due to its superiority on safety and electrochemistry performance. However, the trade-off between the electrolyte swelling ratio and mechanical property of the quasi-solid state electrolyte significantly influences the battery performance. Herein, we design a nonswelling, solvent-adaptive polymer gel composed of oleophobic zwitterion poly(3-(1-vinyl-3-imidazolio)-propanesulfonate) and oleophilic elastomer poly(2-methoxyethyl acrylate) segments to retain high battery performance without sacrificing the mechanical property in lithium batteries. The as-designed gel can not only uptake enough electrolyte for a high ionic conductivity of 1.78 mS cm–1 but also achieve excellent mechanical strength with compression stress at 90% strain (σ0.9) reaching 5.8 MPa after long time soaking for battery safety due to its nonswelling property in ester electrolyte. Moreover, the as-prepared zwitterionic gel is beneficial to electrolyte salt dissociation, which further enhances the ionic conductivity and transference number of batteries. Consequently, the gel electrolyte can cycle for more than 500 h under a high current density of 3 mA cm–2 on dendrite inhibition performance, and when assembled with LiFePO4 as a cathode, the battery demonstrates a reversible specific capacity as high as 70 mAh g–1 under a high current density of 5 C after 300 cycles. The rational designed solvophilic/solvophobic zwitterionic elastomers provide a guidance for engineering quasi-solid state electrolytes of different solvents with broad applications on flexible devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01064?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01064</a>.Molecular structures of PVMGE, VIPS, MEA, PEGDA and HHMP; Raman spectra characterizing the dissociation effect of PVIPS on LiTFSI; images of PV4M3GE before and after the compression; exhibition of the brittleness of PVIPS gel electrolyte; frequency dependencies and tensile test of PV1M1GE; ionic conductivity of the PVMGEs; temperature dependence of ionic conductivity of PV1M1GE; Li stripping/plating voltage profiles and cycling stability of lithium symmetric cells with liquid electrolyte; cycling stability of PMEA electrolyte for lithium symmetric battery; SEM images of lithium anode of lithium symmetric battery with liquid electrolyte and PMEA; LSV curve of lithium symmetric cells; rate performances and cycling performances of liquid electrolyte; CV profiles and cycle stability of LiFePO4/PV1M1GE/Li; and comparison of electrochemical performance for PV1M1GE with other electrolytes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01064/suppl_file/am1c01064_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Decoupling of Mechanical Strength and Ionic Conductivity in Zwitterionic Elastomer Gel Electrolyte toward Safe Batteries

In-situ Generation of Poly(ionic Liquid) Flexible Quasi-Solid Electrolyte Supported by Polyhedral Oligomeric Silsesquioxane/polyvinylidene Fluoride Electrospun Membrane for Lithium Metal Battery

Decoupling the Mechanical Strength and Ionic Conductivity of an Ionogel Polymer Electrolyte for Realizing Thermally Stable Lithium-Ion Batteries

High-performance gel electrolyte for enhanced interface compatibility and lithium metal stability in high-voltage lithium battery

Facile In Situ Chemical Cross-Linking Gel Polymer Electrolyte, which Confines the Shuttle Effect with High Ionic Conductivity and Li-Ion Transference Number for Quasi-Solid-State Lithium–Sulfur Battery

A Flexible Semi-Interpenetrating Network-Enhanced Ionogel Polymer Electrolyte for Highly Stable and Safe Lithium Metal Batteries

Rationally Designed in-Situ Gelled Polymer-Ceramic Hybrid Electrolyte Enables Superior Performance and Stability in Quasi-Solid-State Lithium-Sulfur Batteries

Regulating the Solvation Shell Structure of Lithium Ions for Smooth Li Metal Deposition in Quasi-Solid-State Batteries

Deformable and Flexible Electrospun Nanofiber-Supported Cross-Linked Gel Polymer Electrolyte Membranes for High Safety Lithium-Ion Batteries

Metal–Organic Framework-Supported Poly(ethylene oxide) Composite Gel Polymer Electrolytes for High-Performance Lithium/Sodium Metal Batteries

A Flexible and Self-Healing Ionic Gel Electrolyte Based on a Zwitterion (ZI) Copolymer for High-Performance Lithium Metal Batteries

Rational Design of Sandwich-Like “Gel–Liquid–Gel” Electrolytes for Dendrite-Free Lithium Metal Batteries

Integration of Gel Polymer Electrolytes with Dry Electrodes for Quasi-Solid-state Batteries

Quasi-Gel Polymer Electrolyte Interfaced with Electrodes through Solvent-Swollen Poly(ethylene oxide) for High-Performance Lithium/Lithium-Ion Batteries

Polymer‐Ion Interaction Prompted Quasi‐Solid Electrolyte for Room‐Temperature High‐Performance Lithium‐Ion Batteries

Supramolecular polymer cross-linking gel electrolyte for highly stable quasi-solid-state lithium metal batteries

Quasi-Solid-State Electrolyte Membranes Based on Helical Mesoporous Polysilsesquioxane Nanofibers for High-Performance Lithium Batteries

Poly(ionic liquid)@PEGMA Block Polymer Initiated Microphase Separation Architecture in Poly(ethylene oxide)-Based Solid-State Polymer Electrolyte for Flexible and Self-Healing Lithium Batteries

Flame Retardant and Stable Li1.5Al0.5Ge1.5(PO4)3-Supported Ionic Liquid Gel Polymer Electrolytes for High Safety Rechargeable Solid-State Lithium Metal Batteries

An Ionic Liquid‐Based Gel Electrolyte: Formation Mechanism and Feasibility for Lithium Metal Batteries

Immobilizing Ceramic Electrolyte Particles into a Gel Matrix Formed In Situ for Stable Li-Metal Batteries