Abstract:As a secondary Li-ion battery with high energy density, lithium–sulfur (Li–S) batteries possess high potential development prospects. One of the important ingredients to improve the safety and energy density in Li–S batteries is the solid-state electrolyte. However, the poor ionic conductivity largely limits its application for the commercial market. At present, the gel electrolyte prepared by combining the electrolyte or ionic liquid with the all-solid electrolyte is an effective method to solve the low ion conductivity of the solid electrolyte. We present a cross-linked gel polymer electrolyte with fluoroethylene carbonate (FEC) as a solid electrolyte interface (SEI) film formed for Li–S quasi-solid-state batteries, which can be simply synthesized without initiators. This gel polymer electrolyte with FEC as an additive () possesses high ionic conductivity (0.830 × 10–3 S/cm at 25 °C and 1.577 × 10–3 S/cm at 85 °C) and extremely high Li-ion transference number (tLi+ = 0.674). In addition, the strong ability toward anchoring polysulfides resulting in the high electrochemical performance of Li–S batteries was confirmed in by the diffusion experiment, X-ray photoelectron spectroscopy analysis (XPS), and scanning electron microscopy (SEM) mapping of the S element. Such a high ion conductivity (IC) gel polymer electrolyte enables a competitive specific capacity of 940 mAh/g at 0.2C and supreme cycling performance for 180 cycles at 0.5C, which is far beyond that of conventional poly(ethylene oxide)-based quasi-solid-state Li–S batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c16148.Diagrammatic sketch of preparation of precursors; thickness of the PE separator; H NMR spectra of PEGDE, PEI, and Li–S GPE; XPS spectra of different elements in the PE separator; SEM mapping of the S element on the GPE membrane and the PE separator; and thermal properties of GPE membrane (PDF)This article has not yet been cited by other publications.

A Flexible Semi-Interpenetrating Network-Enhanced Ionogel Polymer Electrolyte for Highly Stable and Safe Lithium Metal Batteries

Decoupling the Mechanical Strength and Ionic Conductivity of an Ionogel Polymer Electrolyte for Realizing Thermally Stable Lithium-Ion Batteries

Deformable and Flexible Electrospun Nanofiber-Supported Cross-Linked Gel Polymer Electrolyte Membranes for High Safety Lithium-Ion Batteries

Flame Retardant and Stable Li1.5Al0.5Ge1.5(PO4)3-Supported Ionic Liquid Gel Polymer Electrolytes for High Safety Rechargeable Solid-State Lithium Metal Batteries

Highly Conductive, Flexible, and Nonflammable Double-Network Poly(ionic Liquid)-Based Ionogel Electrolyte for Flexible Lithium-Ion Batteries.

A Flexible Single-Ion Gel Electrolyte with a Multiscale Channel for the High-Performance Lithium Metal Batteries

Double‐Network Ionogel Electrolyte with Superior Mechanical Performance and High Safety for Flexible Lithium‐Ion Batteries

Poss Hybrid Poly(Ionic Liquid) Ionogel Solid Electrolyte for Flexible Lithium Batteries

Poly(ionic Liquid)-Polyethylene Oxide Semi-Interpenetrating Polymer Network Solid Electrolyte for Safe Lithium Metal Batteries

Dendrite-Free Solid-State Li Metal Batteries Enabled by Bifunctional Polymer Gel Electrolytes

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

An Integrate and Ultra-Flexible Solid-State Lithium Battery Enabled by in Situ Polymerized Solid Electrolyte

Facile In Situ Chemical Cross-Linking Gel Polymer Electrolyte, which Confines the Shuttle Effect with High Ionic Conductivity and Li-Ion Transference Number for Quasi-Solid-State Lithium–Sulfur Battery

A Novel UV-Cured Semi-IPN Structure PEO@Nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

Metal–Organic Framework-Supported Poly(ethylene oxide) Composite Gel Polymer Electrolytes for High-Performance Lithium/Sodium Metal Batteries

In Situ Formed Gel Polymer Electrolytes Enable Stable Solid Electrolyte Interface for High-Performance Lithium Metal Batteries

Enhanced Ionic Conductivity and Interface Stability of Hybrid Solid-State Polymer Electrolyte for Rechargeable Lithium Metal Batteries

A Polyethylene Oxide Based Electrolyte Enabled by the Synergistic Effect of Active LiGaO2 Filler and Ionic Liquid for Superior Lithium Metal Batteries

A Stretchable and Safe Polymer Electrolyte with a Protecting-Layer Strategy for Solid-State Lithium Metal Batteries

Nanophase-Separated, Elastic Epoxy Composite Thin Film as an Electrolyte for Stable Lithium Metal Batteries

A Non-Flammable, Flexible and UV-cured Gel Polymer Electrolyte with Crosslinked Polymer Network for Dendrite-Suppressing Lithium Metal Batteries