Abstract:Micro-EDM is an unconventional technology used to machine every type of electrically conductive material regardless of its mechanical properties. Material removal occurs through electrical discharges between the workpiece and the electrode immersed in a dielectric fluid. In drilling operations, the technology is able to realise microholes with excellent quality in terms of precision, quality surface, roundness, and taper to the detriment of the machining time, which is less than other technologies. Several efforts are being made to improve different features related to the process performance that are severely affected by both the operative conditions, such as the electrode material or the type of dielectric, and process parameters. The typical indexes used to characterise the performance are the machining time, the material removal rate, and the geometric indexes. These indexes are very effective and are easily measurable, but they do not give information about the evolution of the drilling process, which could be irregular due to the different phenomena occurring during machining. The aim of this paper is the development of a method able to elaborate the motion law of the electrode during the micro-EDM drilling operation. In order to do this, a single hole was manufactured in several steps, recording both the machining time and electrode wear for each step. In this way, the actual position of the electrode during the drilling can be measured without the use of a predictive model for electrode wear. It was tested to confirm that the multistep procedure did not introduce new phenomena, in contrast to the traditional drilling operation. This method was used to study the effects of the electrode diameter, the type of electrode, the length of the electrode out of the spindle, and the entity of the run-out on the process performance. The tests were executed on titanium alloy sheets using a tungsten carbide electrode and hydrocarbon oil as the dielectric. It was found that the descent of the electrode into the workpiece was not regular, but it depended on the level of debris concentration in the machining zone. The debris concentration was influenced by the type and diameter of the electrode, its length out of the spindle, and, to a lesser extent, the run-out. This method was found to be a useful method for an in-depth analysis of the micro-EDM drilling process, contributing to a better understanding of the physical aspects of the process.

Study on the Electrical and Geometrical Parameters of Micro Electrical Discharge Machining

Study of the Law Motion of the Micro-EDM Drilling Process

Investigation of micro-electro-discharge machining process parameters during machining of M2 hardened die-steel

Advanced Electric Discharge Machining of Stainless Steels: Assessment of the State of the Art, Gaps and Future Prospect

An investigation on the effect of alumina nano powder mixed dielectric oil on EDM-assisted precision micro-drilling operation

Performance analysis of powder-assisted micro-drilling operation using micro-EDM

To investigate the effect of discharge energy and addition of nano-powder on processing of micro slots using EDM assisted μ-milling operation

Research on the Key Technologies of Micro Electro Discharge Machining

Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders

Machining efficiency and geometrical accuracy on micro-EDM drilling of titanium alloy

Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics

Experimental investigations and optimization of non-electrical parameters during microelectrode fabrication

Machinability of different cutting tool materials for electric discharge machining: A review and future prospects

Optimizing micro-EDM with carbon-coated electrodes: A multi-criteria approach

Comparative Study of Ultrasonic Vibration-Assisted Die-Sinking Micro-Electrical Discharge Machining on Polycrystalline Diamond and Titanium

Influence of Different Tool Electrode Materials on Electrochemical Discharge Machining Performances

An Investigation into Accumulative Difference Mechanism in Time and Space for Material Removal in Micro-EDM Milling

How the Electrical Conductivity of Water Fluids Affects Micro-EDM in the Short-Pulse Regime

Theoretical and Experimental Investigation into Machining Characteristics of VHF Micro-EDM

Influence of Different Dielectrics and Machining Parameters for Electrical Discharge-Assisted Milling of Titanium Alloy

Experimental investigation of machined hole and optimization of machining parameters using electrochemical machining