Abstract:High-reflectance ohmic contacts to p-GaN are the key for Flip-chip ultra-violet light emitting diode (UV-LED) to improve the external quantum efficiency (EQE), so the kinds of metal or alloy film both ohmic contact and the reflector of light are important to choose the appropriate high-reflectance and low-resistance ohmic contact to p-type GaN. The GaN-based LED samples used were grown by Metalorganic Chemical Vapor Deposition (MOCVD). Four different metal films were deposited on the surfaces of p-GaN and annealed Ni/Au alloy. The thickness of these metal films varied from 30 nm to 840 nm. The reflectance and transmittance of the samples were mea- sured by WGS-9 system. The 2θ scans XRD and surface AFM images of the samples were also observed. As results, when the films' thickness under the 130 nm the reflectance of Ag-deposited samples increased with the increasing thickness and the transmittance decreased at wavelength of 400 nm. The reason of the increasing of reflectance is the reduction of the light transmitted through the films. When the films' thickness over 130 nm, the reflectance of Ag-deposited samples decreasing. From the results of XRD and AFM, the metal film formed multi-layers film and the roughness R_a and R_q increased with the increasing thickness. It is suggested that the diffusion of the multi-layers films is the main reason of reduction of reflectance with the films thickness increasing. Other metal films show the same characteristics as the Ag-deposited films. From the result of reflectance, Al and Ag are the suitable candidates for the reflector, but it is reported that the single Al or Ag films don't make good ohmic contacts on p-GaN. So a thin annealed Ni/Au is adopted to interspersed between the Al or Ag reflector and the p-GaN in order to provide efficient hole injection into the device. From the results of reflectance and I-V curves of Ni/Au/Ag and Ni/Au/Al, the I-V characteristics of Ni/Au/Ag and Ni/Au/Al contacts are similar to this of Ni/Au annealed. However the reflectance of Ni/Au/Ag and Ni/Au/Al contacts is three times higher than that of Ni/Au at wavelength of 400 nm. These results demonstrated that Ni/Au/Ag and Ni/Au/Al can be used as high-reflectance and low-resistance p-GaN ohmic contacts for flip-chip UV-LEDs

Ohmic Contact Characteristics of AlGaN-based Deep-ultraviolet Light-emitting-diodes with NiAu Transparent Electrode

Evaluation of Ti/Al/Ni/Au ohmic contact to n-AlGaN with different Ti/Al thickness for deep ultraviolet light emitting diode

High-reflectance Ohmic Contacts to P-Gan of GaN-based Violet LEDs

Ohmic Contact of High Reflectivity on P-Type GaN

The composited high reflectivity p-type electrodes with patterned ITO for AlGaN-based ultraviolet light emitting diodes

Highly Reflective Ni/Ag/Pt/Au Ohmic Contacts To P-Gan With Ito Interlayer

Improved Reliability of AlGaN-Based Deep Ultraviolet LED With Modified Reflective N-Type Electrode

Investigation of Highly Reflective P-Electrodes for AlGaN-based Deep-Ultraviolet Light-Emitting Diodes.

Significant improvement of n-contact performance and wall plug efficiency of AlGaN-based deep ultraviolet light-emitting diodes by atomic layer etching

Improving Light Extraction Efficiency of AlGaN-Based Deep Ultraviolet Light-Emitting Diodes by Combining Thinning P-Algan/p-gan Layer with Ni/Au/Al High-Reflectivity Electrodes

The Role of Ni and Au on Transparent Film of Blue LEDs

Improving the Performance of Free-pGaN Deep-Ultraviolet Light-Emitting Diodes by Embedding Self-Assembled Ni Nanoparticles Between p-AlGaN/p-Electrode

Transparent P-Type Layer with Highly Reflective Rh/Al P-Type Electrodes for Improving the Performance of AlGaN-based Deep-Ultraviolet Light-Emitting Diodes

A Novel Ni/Ag/Pt Ohmic Contact to P-Type GaN for Flip-Chip Light-Emitting Diodes

Study on the Degradation Performance of AlGaN-Based Deep Ultraviolet LEDs under Thermal and Electrical Stress

Pure ultraviolet light-emitting diode based on the p-NiO/i-NiO/n-GaN structure by magnetron sputtering

Improved Light Extraction Efficiency of AlGaN Deep-Ultraviolet Light Emitting Diodes Combining Ag-nanodots/Al Reflective Electrode with Highly Transparent P-Type Layer.

Optimization of growth parameters of AlN thin films and investigation of electrical and electroluminescence characteristics from Au/i-AlN/n-GaN UV light-emitting diode

Thermal annealing behaviour of Al/Ni/Au multilayer on n-GaN Schottky contacts

Thermal behavior of AlGaN-based deep-UV LEDs

Enhanced contact performance of high-brightness micro-LEDs via ITO/Al anode stack and annealing process