Abstract:Liquid lead-lithium (Pb-16Li) is of primary interest as one of the candidate materials for tritium breeder, neutron multiplier and coolant fluid in liquid metal blanket concepts relevant to fusion power plants. For an effective and reliable operation of such high temperature liquid metal systems, monitoring and control of critical process parameters is essential. However, limited operational experience coupled with high temperature operating conditions and corrosive nature of Pb-16Li severely limits application of commercially available diagnostic tools. This paper illustrates indigenous calibration test facility designs and experimental methods used to develop non-contact configuration level diagnostics using pulse radar level sensor, wetted configuration pressure diagnostics using diaphragm seal type pressure sensor and bulk temperature diagnostics with temperature profiling for high temperature, high pressure liquid Pb and Pb-16Li applications. Calibration check of these sensors was performed using analytical methods, at temperature between 380C-400C and pressure upto 1 MPa (g). Reliability and performance validation were achieved through long duration testing of sensors in liquid Pb and liquid Pb-16Li environment for over 1000 hour. Estimated deviation for radar level sensor lies within [-3.36 mm, +13.64 mm] and the estimated error for pressure sensor lies within 1.1% of calibrated span over the entire test duration. Results obtained and critical observations from these tests are presented in this paper.

Liquid Level Measurement and Control in High Temperature and High-pressure Environments of Nuclear Power Plant

Improved Apparatus for Inline Measurement of Residence Time Distribution of Thermomechanically Complex Systems

Measurement of Particle Materials and Liquid Level

Research on Nuclear Post-accident Liquid Level Detection Signal Deviation in Nuclear Power Plant Reactor Building

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

Measurement and control system for gas-tight deep-sea water sampler based on LabVIEW

A novel encoding water level monitor system during and after LOCAs in a nuclear heating reactor

Design of Liquid Level Control System of Nuclear Power Plant

Application of Multi-Tangential Firing Technology to Settling the High Temperature Corrosion of Water Wall Tube of Boiler

Study on water level sensors in NHR-200 vessel

Natural Circulation Differential Pressure Measurement Correction Technology Based on IAPWS-IF97

Liquid Collapse Level Monitoring for Nuclear Reactors During Loss of Coolant Accident

Design of the sampling measurement and radiochemistry lab in the nuclear island of HTR PM

Analysis and Optimization of Deaerator Level Measurement in Nuclear Power Station Conventional Island

The experiment platform and measurement-control system of VTE-MED coupled with NHR

Noninvasive Liquid Level Sensing with Laser Generated Ultrasonic Waves

Design, Operation And Maintenance Of Thermal Hydraulic Instrumentation System Of Htr-10

Development of Diagnostics for High-Temperature High-Pressure Liquid Pb-16Li Applications

Simulation and calibration of radiation monitoring of nuclear power plant containment sump waste liquid

System for measuring the level and density of liquids in nuclear-safe devices for new spent nuclear fuel reprocessing facilities

High temperature imaging dynamic measurement techniques under harsh experimental environment